Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP1100 — Trang 18/25

Code: SC765

Description: Fold Unit Bottom Fence Lift Motor Error
The fold unit bottom fence did not return to the home position within the specified time.
Causes: • Fold bottom fence mechanism overloaded due to an obstruction
• Fold bottom fence HP sensor connector loose, broken, defective
• Fold bottom fence HP sensor defective
• Fold bottom fence lift motor connector loose, broken, defective
• Fold bottom fence lift motor defective
• Main control board defective

Code: SC766

Description: Clamp Roller Retraction Motor
The clamp roller did not return to the home position within the specified time.
Causes: • Clamp roller mechanism overloaded due to an obstruction
• Clamp roller HP sensor connector loose, broken, defective
• Clamp roller HP sensor defective
• Clamp roller retraction motor connector loose, broken, defective
• Clamp roller retraction motor defective
• Main control board defective

Code: SC767

Description: Stack Junction Gate Motor
The stack junction gate did not return to the home position within the specified time.
Causes: • Stack junction mechanism overloaded due to an obstruction
• Stack junction gate HP sensor connector loose, broken, defective
• Stack junction gate HP sensor defective
• Stack junction gate motor connector loose, broken, defective
• Stack junction gate motor defective
• Main control board defective

Code: SC770

Description: Cover Interposer Lift Motor 1 Error
In the first tray:
• The upper limit sensor did not detect the bottom plate within the specified time after the lift motor switched on to lift the bottom plate.
• The lower limit sensor did not direct the bottom plate within the specified time after the lift motor switched on to lower the bottom plate.
Note: In both cases, 1 error count indicates a jam, 2 error counts issue this SC code.
Causes: • Lift motor, upper limit sensor, lower limit sensor harnesses, connectors loose, broken, defective
• Lift motor defective
• Upper limit sensor defective
• Lower limit sensor defective

Code: SC771

Description: Cover Interposer Lift Motor 2 Error
In the second tray:
• The upper limit sensor did not detect the bottom plate within the specified time after the lift motor switched on to lift the bottom plate.
• The lower limit sensor did not direct the bottom plate within the specified time after the lift motor switched on to lower the bottom plate.
Note: In both cases, 1 error count indicates a jam, 2 error counts issue this SC code.
Causes: • Lift motor, upper limit sensor, lower limit sensor harnesses, connectors loose, broken, defective
•Lift motor defective
• Upper limit sensor defective
• Lower limit sensor defective

Code: SC772

Description: Cover Interposer Pickup Motor 1 Error
In the first tray:
• While the pick-up roller motor was on, the pick-up roller HP sensor did not detect the pick-up roller at the home position within the specified number of pulses.
• While the pick-up roller motor was on, the pick-up roller HP sensor did not detect the pick-up roller at the home position above the specified number of pulses.
Note: In both cases, 1 error count indicates a jam, 2 error counts issue this SC code.
Causes: • The pick-up motor, pick-up roller HP sensor harnesses, connectors were loose, broken, defective
• Pick-up motor overload due to an obstruction
• Pick-up motor defective
• Pick-up roller HP sensor defective

Code: SC773

Description: Cover Interposer Pickup Motor 2 Error
In the second tray:
• While the pick-up roller motor was on, the pick-up roller HP sensor did not detect the pick-up roller at the home position within the specified number of pulses.
• While the pick-up roller motor was on, the pick-up roller HP sensor did not detect the pick-up roller at the home position above the specified number of pulses.
Note: In both cases, 1 error count indicates a jam, 2 error counts issue this SC code.
Causes: • The pick-up motor, pick-up roller HP sensor harnesses, connectors were loose, broken, defective
• Pick-up motor overload due to an obstruction
• Pick-up motor defective
• Pick-up roller HP sensor defective

Code: SC775

Description: Jogger Top Fence Motor: 3K Finisher B830
The top fence HP sensor detected that: The top fence did not arrive at the home position within the specified number of pulses. -or- The top fence failed to leave the home position within the specified number of pulses.
Causes: • If the jogger top fence motor is operating: 1 Top fence HP sensor harness loose, broken, defective 2 Top fence HP sensor defective
• If the jogger top fence motor is not operating: 1 Motor blocked by an obstruction 2 Motor harness loose, broken, defective 3 Motor defective 4 Finisher main board defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie