• Code: SC857
• Description: USB I/F Error 1
  The USB driver is unstable and generated an error. The USB I/F cannot be used.
• Causes: • USB board or controller board defective

• Code: SC860
• Description: HDD Error 1
  The driver could not acquire the status of the hard disks within 30 s, or the HDD is connected, but the driver detected
• Causes: • Hard disks are not formatted
  • Hard disk corrupted; reformat the disks with SP mode

• Code: SC861
• Description: HDD Error b2: HDD Startup
  The hard disks were detected at power on, but the disks were not detected within 30 s after recovery from the energy conservation mode.
• Causes: • Cable between the hard disks and controller board disconnected or loose
  • Hard disk power connector loose
  • One of the hard disks is defective
  • Controller or mother board defective

• Code: SC862
• Description: HDD Error 3: Bad Sectors
  The number of bad sectors on the HDD in the area for storing images exceeds 101
• Causes: • Too many bad sectors accumulated on the HDDs.
  • Execute SP5832 002 (HDD Formatting – IMH) to format the HDD and replace the bad sectors; copy the stamp data after doing this (use SP 5853).
  • HDD replacement is recommended because an HDD unit that generates bad sectors is probably of poor quality and performs poorly.

• Code: SC863
• Description: HDD Error 4: HDD Read Error
  The system cannot read the data written on the hard disks.
• Causes: • Sectors on the disks have become corrupted during operation; replace the hard disks

• Code: SC864
• Description: HDD Error 5: Data CRC Error
  During HDD operation, the HDD could not respond to a CRC error query.
• Causes: • Mother board defective

• Code: SC865
• Description: HDD Error 6: Access Error
  HDD responded to an error during operation for a condition other than those for SC863, SC864
• Causes: • HDD defective

• Code: SC866
• Description: SD Card Error 1: Confirmation
  The machine detects an electronic license error in the application on the SD card inserted in the controller slot when the machine is powered on. The program stored on the SD card contains electronic confirmation license data. If the program does not contain this license data, or if the result of the check reveals the license data in the program on the SD card is incorrect, then the checked program cannot execute and this SC code is displayed.
• Causes: • Required program missing or incorrect
  • Download the correct program for this machine onto the SD card.