Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP301SP — Trang 2/15

Code: 162-001

Description: IPC:PCIE error PCIE Communication error
Doesn’t occur insertion request of linking-up from the LYRA on startup. Or NOT the number of the connection lanes detected is two.
Causes: • Defective IPU (BICU, IPU)

Code: 165

Description: Unauthorized copy protection Failed
Detecting the ICIB wrong or NOT attached on the copier under setting unauthorized copy protection on. Or detecting wrong with the ICIB on startup.
Causes: • NOT the ICIB attached firmly.
• Defective the ICIB

Code: 202

Description: Polygon motor error: Time out (On)
NOT detecting making the polygon motor be ready in certain time after start polygon motor up or change the spin speed.
Causes: • Harness and the polygon motor driver.
• Defective the polygon motor or the polygon motor driver.
• Defective polygon motor drive pulse output (Around polygon control part)
• Unable to monitor XSCRDY signal (Around polygon control parts)
• Bad connection or disconnection between the I/F

Code: 203

Description: Polygon motor error: Time out (Off)
NOT XSCRDY signal becoming "H" (Inactive) within three seconds.
Causes: • Harness and the polygon motor driver.
• Defective the polygon motor or the polygon motor driver.
• Defective polygon motor drive pulse output (Around polygon control parts)
• Unable to monitor XSCRDY signal (Around polygon control parts)
• Bad connection or disconnection between the I/F

Code: 204

Description: Polygon motor error: XSCRDY signal error
Detecting XSCRDY signal "H" (Inactive) while writing.
Causes: • Harness and the polygon motor driver.
• Defective the polygon motor or the polygon motor driver.
• Bad connection or disconnection between the I/F

Code: 220

Description: LD synchro-detection error
NOT output certain syncro-detection signal within 200ms after LD lighting in steady-rotation.
Causes: • Bad connection or disconnection between the I/F harness and the syncro-detection Unit.
• Defective the syncro-detection
• NOT the beam going into the photo detector
• Defective the GAVD related parts, the LD driver, the LDB, the BICU

Code: 230

Description: FGATE: Fail to switch "ON"
NOT switching FGATE signal on within one second after writing start-timing.
Causes: • Defective the GAVD, PCI bridge ASIC
• BICU, the Controller board wrong or bad connection
• Defective the harness between the BICU to the LDB

Code: 231

Description: FGATE: Fail to switch "OFF"
NOT switching FGATE signal off within nine seconds after writing end-timing.
Causes: • BICU, the Controller board wrong or bad connection
• Defective the harness between the BICU to the LDB
• Defective the GAVD, PCI bridge ASIC
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie