Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP7001 — Trang 27/28

Code: 920

Description: Printer Error 1
An internal application error was detected and operation cannot continue.
Causes: • Software defective, switch off/on, or change the controller firmware if the problem is not solved. • Insufficient memory
Remedy:

Code: 921

Description: Printer Error 2
When the printer application started, the font to use could not be found on the SD card.
Causes: • The font is not on the SD card
Remedy:

Code: 925

Description: Net File Function Error
Causes:
Remedy:

Code: 953

Description: Scanner image setting error
The settings required for image processing using the scanner are not sent from the IPU.
Causes: • Software defective
Remedy:

Code: 954

Description: Printer image setting error
The settings required for image processing using the printer controller are not sent from the IPU.
Causes: • Software defective
Remedy:

Code: 955

Description: Memory setting error
The settings that are required for image processing using the memory are not sent from the IPU.
Causes: • Software defective
Remedy:

Code: 964

Description: Printer ready error
The print ready signal is not generated for more than 17 seconds after the IPU received the print start signal.
Causes: • Software defective
Remedy:

Code: 984

Description: Print image data transfer error
After a data transfer begins from the controller to the engine via the PCI bus, the transfer does not end within 15 s.
Causes: • Controller (SIMAC) board defective • BICU defective • BICU/controller disconnected
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie