Description: Fusing web motor error 3 SC540-02 has occurred at total of 10 times and the machine has shut down automatically due to failure of the web motor.
Causes: • Web motor harness loose, broken, defective • Web motor disconnected • Web motor defective
Description: Fusing thermistor open The fusing temperature detected by the center thermistor was below 0°C for 7 s.
Causes: • Thermistor open • Thermistor connector defective • Thermistor damaged, or out of position • Fusing temperature –15% less than the standard input voltage
Description: Fusing temperature warm-up error 1: Center themistor The center thermistor that touches the hot roller determined that the hot roller failed to reach the warm-up temperature within the prescribed time.
Causes: • Fusing lamp disconnected • Thermistor warped, out of position • Thermostat has opened
Description: Fusing temperature warm-up error 2: Center themistor The center thermistor that touches the hot roller determined that the hot roller failed to reach 100 within the prescribed time.
Causes: • Fusing lamp disconnected • Thermistor warped, out of position • Thermostat has opened
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.