Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP9002 — Trang 12/33

Code: 590-00

Description: Toner collection motor error The toner collection motor sensor output does not change for 3 s while the toner collection motor is on.
Causes: • Motor lock due to obstruction • Motor driver board defective • Motor connection loose, defective • Toner collection motor sensor disconnected, sensor defective • Rotational transmission shaft (dia. x 30) missing

Code: 620-01

Description: BCU-ADF Communication Error: Break RX abnormal A BREAK was detected after connection.
Causes: • ADF I/F cable connection loose, broken, defective • ADF control board defective • BCU defective • Serial line level unstable • External noise on the line

Code: 620-2

Description: BCU-ADF Communication Error: Timeout
Causes: • ADF I/F cable connection loose, broken, defective • ADF control board defective • BCU defective • Serial line level unstable • External noise on the line

Code: 621-01

Description: BICU/Finisher communication error: Break error During communication with the finisher MBX, the BICU received a break (Low) signal from the finisher.
Causes: • Connection between main machine loose, broken, defective • Breaker switch defective • Power cord loose, broken, defective • Peripheral unit control board defective

Code: 621-02

Description: BCU/Finisher communication error: Timeout error During communication between the finisher MBX and the BCU, no ACK signal was detected for 100 ms, even after three attempts.
Causes: • Connection between main machine loose, broken, defective • Breaker switch defective • Power cord loose, broken, defective • Peripheral unit control board defective • BCU defective • Serial line level unstable, external noise on the line

Code: 623

Description: BCU-PFB communication error More than 2 in communication errors between the BCU and PFB were detected after startup, or more than 3 errors were detected after settings were initialized.
Causes: • Harness connectors between BCU and PFB loose, broken, disconnected • Serial line connection unstable • External noise on the line • BCU defective • PFB defective

Code: 626-01

Description: BICU, LCT communication error: Break reception error During communication with the LCT, the BICU received a break (Low) signal.
Causes: • LCT connection to main machine loose, broken, defective • LCT control board defective • BCU defective • Serial line connection unstable • External noise on the line

Code: 626-02

Description: BICU, LCT communication error: Timeout error After 1 data frame is sent to the LCT, an ACK signal is not received within 100 ms, and is not received after 3 retries.
Causes: • LCT connection to main machine loose, broken, defective • LCT control board defective • BCU defective • Serial line connection unstable • External noise on the line
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie