• Code: SC700-04
• Description: Paper Feed Motor Error (1-pass ADF) When an error notification signal is detected during the motor drive period.
• Causes: • Motor defective • Connector disconnected • Harness broken • Overload
• Remedy: -01, 02 • Check the sensor harness and motor harness connection • Replace the sensor harness and motor harness • Replace the sensor • Replace the motor • Replace the controller -04, 05, 06, 07, 09 • Check the harness connection • Replace the harness • Replace the motor 5. Troubleshooting

• Code: SC700-05
• Description: Pullout Motor Error (1-pass ADF) When an error notification signal is detected during the motor drive period.
• Causes: • Motor defective • Connector disconnected • Harness broken • Overload
• Remedy: -01, 02 • Check the sensor harness and motor harness connection • Replace the sensor harness and motor harness • Replace the sensor • Replace the motor • Replace the controller -04, 05, 06, 07, 09 • Check the harness connection • Replace the harness • Replace the motor

• Code: SC700-06
• Description: Intermediate Motor Error (1-pass ADF) When an error notification signal is detected during the motor drive period.
• Causes: • Motor defective • Connector disconnected • Harness broken • Overload
• Remedy: -01, 02 • Check the sensor harness and motor harness connection • Replace the sensor harness and motor harness • Replace the sensor • Replace the motor • Replace the controller -04, 05, 06, 07, 09 • Check the harness connection • Replace the harness • Replace the motor

• Code: SC700-07
• Description: Scanning Motor Error (1-pass ADF) When an error notification signal is detected during the motor drive period.
• Causes: • Motor defective • Connector disconnected • Harness broken • Overload
• Remedy: -01, 02 • Check the sensor harness and motor harness connection • Replace the sensor harness and motor harness • Replace the sensor • Replace the motor • Replace the controller -04, 05, 06, 07, 09 • Check the harness connection • Replace the harness • Replace the motor

• Code: SC700-09
• Description: Paper Exit Motor Error (1-pass ADF) When an error notification signal is detected during the motor drive period.
• Causes: • Motor defective • Connector disconnected • Harness broken • Overload
• Remedy: -01, 02 • Check the sensor harness and motor harness connection • Replace the sensor harness and motor harness • Replace the sensor • Replace the motor • Replace the controller -04, 05, 06, 07, 09 • Check the harness connection • Replace the harness • Replace the motor

• Code: SC701-02
• Description: Original Pick-up Motor Driver Error (1-pass ADF) When the protective function of motor driver IC detects: • Over current • Heating and an error is output
• Causes: Motor driver IC detects an error
• Remedy: • Check the motor harness connection • Check of paper scrap in transport path, and foreign matter contamination in drive unit • Replace the motor harness • Replace the motor • Replace the controller

• Code: SC701-03
• Description: Paper Feed Motor Driver Error (ARDF) Detection of error signal from motor driver
• Causes: • Encoder disconnection • Encoder connector dropout • Encoder defective • Overload • Motor deterioration
• Remedy: • Replace the encoder harness • Check the harness connection • Replace the motor

• Code: SC701-08
• Description: Paper Exit Motor Driver Error (ARDF) Detection of error signal from motor driver.
• Causes: • Encoder disconnection • Encoder connector dropout • Encoder defective • Overload • Motor deterioration
• Remedy: • Replace the encoder harness • Check the harness connection • Replace the motor