Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC6501 — Trang 33/44

Code: SC744

Description: Booklet stapler motor error 2
The rear stapler unit saddle-stitch motor does not start operation within the specified time. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: • Rear motor disconnected, defective • Rear motor overloaded due to obstruction

Code: SC745

Description: Feed-Out Belt Motor Error (D373/B830)
The stack feed-out belt HP sensor does not activate within the specified time after the stack feed-out belt motor turns on. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: If the motor is operating 1. Stack feed-out HP sensor harness loose, broken, defective 2. Stack feed-out HP sensor defective If the motor is not operating: 1. Feed-out motor blocked by an obstruction 2. Feed-out motor harness loose, broken, defective 3. Feed-out motor defective 4. Booklet finisher main board defective

Code: SC746

Description: Stack Plate Motor Error 1: Front Motor (B830)
The stack plate HP sensor (front) does not activate within 500 ms after the motor turns on. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: If the motor is operating 1. Front stack plate HP sensor harness loose, broken, defective 2. Front stack plate HP sensor defective If the motor is not operating: 1. Motor blocked by an obstruction 2. Motor harness loose, broken, defective 3. Motor defective 4. Booklet finisher main board defective

Code: SC747

Description: Stack Plate Motor Error 2: Center Motor (B830)
The stack plate HP sensor (center) does not activate within 500 ms after the motor turns on. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: If the motor is operating 1. Center stack plate HP sensor harness loose, broken, defective 2. Center stack plate HP sensor defective If the motor is not operating: 1. Motor blocked by an obstruction 2. Motor harness loose, broken, defective 3. Motor defective 4. Booklet finisher main board defective

Code: SC748

Description: Stack Plate Motor Error 3: Rear Motor (B830)
The stack plate HP sensor (rear) does not activate within 500 ms after the motor turns on. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code
Causes: If the motor is operating 1. Rear stack plate HP sensor harness loose, broken, defective 2. Rear stack plate HP sensor defective If the motor is not operating: 1. Motor blocked by an obstruction 2. Motor harness loose, broken, defective 3. Motor defective 4. Booklet finisher main board defective

Code: SC750

Description: Finisher tray 1 (upper tray lift) motor error
The upper tray paper height sensor does not change its status with the specified time after the tray raises or lowers. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: • Tray lift motor disconnected, defective • Upper tray paper height sensor disconnected, defective • Finisher main board connection to motor loose • Finisher main board defective

Code: SC753

Description: Stacking Roller Motor Error (B830)
The return drive HP sensor did not detect the stacking roller at the HP sensor within 1 sec. -or- The stacking roller did not leave the home position at the specified time.
Causes: If the motor is operating 1. Return drive HP sensor harness loose, broken, defective 2. Return drive HP sensor defective If the motor is not operating: 1. Motor blocked by an obstruction 2. Motor harness loose, broken, defective 3. Motor defective 4. Finisher main board defective

Code: SC754

Description: Stacking Roller Drag Motor Error (B830)
The stacking roller drag motor did not turn on.
Causes: • Motor harness loose, broken, defective • Motor defective • Finisher control board defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie