Remedy: • Reformat the SD card (using the "SD Formatter" made by Panasonic).* • Check the SD card insertion status. • Replace the SD card. • Replace the controller board.
Remedy: SD card that starts an application • Turn the main power off and check the SD card insertion status. • If no problem is found, insert the SD card and turn the main power on. • If an error occurs, replace the SD card. • SD card for users • In case of a file system error, reformat the SD card (using the "SD Formatter" made by Panasonic).* • In case of a device access error, turn the main power off and check the SD card insertion status. • If no problem is found, insert the SD card and turn the main power on. • If an error occurs, use another SD card. • If the error persists
Description: Address Book data error. When an error related to the Address Book is detected during startup or operation.
Causes: • Software bug • Inconsistency of Address Book source location (machine/delivery server/LDAP server) • Inconsistency of Address Book encryption setting or encryption key (NVRAM or HDD was replaced individually without formatting the Address Book) • Address Book storage device (SD/HDD) was temporarily removed or hardware configuration does not match the application configuration. • Address Book data corruption was detected.
Remedy: • Check the HDD connection. • Initialize all UCS settings and address/authentication information (SP5-846-046). • Initialize the Address Book partition (SP5-832-006).
Description: HDD mail reception error An error was detected on the HDD immediately after the machine was turned on.
Causes: • HDD defective • Power was turned of while the machine used the HDD.
Remedy: • Format the HDD (SP5-832-007). • Replace the HDD. When you do the above, the following information will be initialized. • Partly received partial mail messages. • Already-read statuses of POP3-received messages (All messages on the mail server are handled as new messages).
Description: HDD mail reception error An error was detected on the HDD immediately after the machine was turned on.
Causes: • HDD defective • Power was turned of while the machine used the HDD.
Remedy: • Format the HDD (SP5-832-007). • Replace the HDD. When you do the above, the following information will be initialized. • Default sender name/password (SMB/FTP/NCP) • Administrator mail address • Scanner delivery history
Description: Delete all error (HDD erasure) (hddchack –i error). An error was detected before HDD/data erasure starts. (Failed to erase data/failed to logically format HDD)
Causes: • HDD logical formatting failed. • The modules failed to erase data.
Remedy: Turn the main power off/on.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.