• Code: SC875-02
• Description: Delete all error (HDD erasure) (Data deletion failure). An error was detected before HDD/data erasure starts. (Failed to erase data/failed to logically format HDD)
• Causes: • HDD logical formatting failed. • The modules failed to erase data.
• Remedy: Turn the main power off/on.

• Code: SC876-01
• Description: Log Data Error 1 An error was detected in the handling of the log data at power on or during machine operation.
• Causes: Damaged log data file
• Remedy: Initialize the HDD (SP5-832-004).

• Code: SC876-02
• Description: Log Data Error 2 An error was detected in the handling of the log data at power on or during machine operation.
• Causes: Log encryption is enabled but encryption module is not installed.
• Remedy: • Replace or set again the encryption module. • Disable the log encryption setting.

• Code: SC876-03
• Description: Log Data Error 3 An error was detected in the handling of the log data at power on or during machine operation.
• Causes: Inconsistency of encryption key between NV-RAM and HDD.
• Remedy: • Disable the log encryption setting. • Initialize LCS memory (SP5801-019). • Initialize the HDD (SP5-832-004).

• Code: SC876-04
• Description: Log Data Error 4 An error was detected in the handling of the log data at power on or during machine operation.
• Causes: • Log encryption key is disabled but the log data file is encrypted. (NVRAM data corruption) • Log encryption key is enabled but the log data file is not encrypted. (NVRAM data corruption)
• Remedy: Initialize the HDD (SP5-832-004).

• Code: SC876-05
• Description: Log Data Error 5 An error was detected in the handling of the log data at power on or during machine operation.
• Causes: • Only the NV-RAM has been replaced with one previously used in another machine. • Only the HDD has been replaced with one previously used in another machine.
• Remedy: • Attach the original NV-RAM. • Attach the original HDD. • With the configuration that caused the SC, initialize the HDD (SP5-832-004).

• Code: SC876-99
• Description: Log Data Error 99. An error was detected in the handling of the log data at power on or during machine operation.
• Causes: Other causes
• Remedy:

• Code: SC877-00
• Description: Data Overwrite Security card error The "Auto Erase Memory" function of the Data Overwrite Security is set to on but it cannot be done.
• Causes: • Data Overwrite Security option SD card is broken. • Data Overwrite Security option SD card has been removed.
• Remedy: • If the SD card is broken, prepare a new Data Overwrite Security option SD card and replace the NVRAM. • If the SD card has been removed, turn the main power off and reinstall a working Data Overwrite Security option SD card.