Code :

Code: SC995-04
Description: CPM setting error
Causes: Machine serial number (11 digits) or machine identification code does not match.
Remedy: • Return the parts to the original configuration, and then replace them according to the manual.

Code: SC997-00
Description: Application function selection error • The application has not responded to the set command created by SCS within a certain period of time. • The application selected ended abnormally.
Causes: Software bug
Remedy: • Check whether an option required by the application (RAM, DIMM, board) is installed properly. • Check whether downloaded applications are correctly configured. (Take necessary countermeasures specific to the application in which the error occurs. In some applications, the logs can be taken from the monitor. If this option is available, analyze the logs.)

Code: SC998-00
Description: Application start error • After power on, no application program is registered to the system within a predetermined period of time. (No application starts or ends normally.) • Even if they are started, all applications have become unable to be rendered due to an unknown defect.
Causes: • Software bug • An option required by the application (RAM, DIMM, board) is not installed properly
Remedy: • Turn the main power off/on. • Check whether an option required by the application (RAM, DIMM, board) is installed properly. • Check whether downloaded applications are correctly configured. • Replace the controller board.