Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio SPC420DN — Trang 4/15

Code: 243

Description: LDB error [C]
The EGB detects LDB error a few times consecutively when LDB unit turns on after LDB initialization.
Causes: Defective LDB
Remedy: 1. Replace the LDB.

Code: 270

Description: LDU shutter error
Sensor output does not change even if 1 second passes after the LDU shutter motor is on.
Causes: Sensor defective or LDU shutter motor defective
Remedy: 1. Replace the LDU shutter sensor or shutter motor.

Code: 300

Description: High voltage power board: Charge voltage output error [K]
The measured voltage is not proper when EGB measures the charge output for each color.
Causes: Defective charge roller. Defective connectors. Disconnected harness. Defective high voltage power 1.
Remedy: 1. Check the connectors. 2. Replace the PCU for black. 3. Replace the drum positioning plate. 4. Replace the high voltage power 1.

Code: 301

Description: High voltage power board: Charge voltage output error [M]
The measured voltage is not proper when EGB measures the charge output for each color.
Causes: Defective charge roller. Defective connectors. Disconnected harness. Defective high voltage power 1.
Remedy: 1. Check the connectors. 2. Replace the PCU for magenta. 3. Replace the drum positioning plate. 4. Replace the high voltage power 1.

Code: 302

Description: High voltage power board: Charge voltage output error [C]
The measured voltage is not proper when EGB measures the charge output for each color.
Causes: Defective charge roller. Defective connectors. Disconnected harness. Defective high voltage power 1.
Remedy: 1. Check the connectors. 2. Replace the PCU for cyan. 3. Replace the drum positioning plate. 4. Replace the high voltage power 1.

Code: 303

Description: High voltage power board: Charge voltage output error [Y]
The measured voltage is not proper when EGB measures the charge output for each color.
Causes: Defective charge roller Defective connectors Disconnected harness Defective high voltage power 1
Remedy: 1. Check the connectors. 2. Replace the PCU for yellow. 3. Replace the drum positioning plate. 4. Replace the high voltage power 1.

Code: 304

Description: Charge AC bias error [K]
The charge current less than 200 mkA is detected.
Causes: Defective charge roller. Defective connectors. Disconnected harness. Defective high voltage power 1.
Remedy: 1. Check the connectors. 2. Replace the PCU for black. 3. Replace the drum positioning plate.

Code: 305

Description: Charge AC bias error [M]
The charge current less than 200 mkA is detected.
Causes: Defective charge roller. Defective connectors. Disconnected harness. Defective high voltage power 1.
Remedy: 1. Check the connectors. 2. Replace the PCU for magenta. 3. Replace the drum positioning plate. 4. Replace the high voltage power 1.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie