Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio SPC420DN — Trang 6/15

Code: 365

Description: TD sensor Output minimum error [M]
Vt is less than the minimum value (0.5) for three times consecutively.
Causes: Defective connector connection. Decreasing toner density
Remedy: 1. Replace the PCU.

Code: 366

Description: TD sensor: Output minimum error [C]
Vt is less than the minimum value (0.5) for three times consecutively.
Causes: Defective connector connection. Decreasing toner density
Remedy: 1. Replace the PCU.

Code: 367

Description: TD sensor: Output minimum error [Y]
Vt is less than the minimum value (0.5) for three times consecutively.
Causes: Defective connector connection. Decreasing toner density
Remedy: 1. Replace the PCU.

Code: 368

Description: TD sensor: Initial control voltage error [K]
Vt is less than 1 V even though the control power voltage is adjusted to the maximum. Vt is more than 1 V even though the control power voltage is adjusted to the minimum.
Causes: Defective connector connection. Defective TD sensor. The toner density in the developer is different.
Remedy: 1. Replace the PCU.

Code: 369

Description: TD sensor: Initial control voltage error [M]
Vt is less than 1 V even though the control power voltage is adjusted to the maximum. Vt is more than 1 V even though the control power voltage is adjusted to the minimum.
Causes: Defective connector connection. Defective TD sensor. The toner density in the developer is different.
Remedy: 1. Replace the PCU.

Code: 370

Description: TD sensor: Initial control voltage error [C]
Vt is less than 1 V even though the control power voltage is adjusted to the maximum. Vt is more than 1 V even though the control power voltage is adjusted to the minimum.
Causes: Defective connector connection. Defective TD sensor. The toner density in the developer is different.
Remedy: 1. Replace the PCU.

Code: 371

Description: TD sensor: Initial control voltage error [Y]
Vt is less than 1 V even though the control power voltage is adjusted to the maximum. Vt is more than 1 V even though the control power voltage is adjusted to the minimum.
Causes: Defective connector connection. Defective TD sensor. The toner density in the developer is different.
Remedy: 1. Replace the PCU.

Code: 372

Description: TD sensor: Initial adjustment error [K]
Vt is not (A +-0.2) when initial setting for TD sensor is executed. A = SP3011-001 for [K]
Causes: Defective connector connection. Defective TD sensor. The toner density in the developer is different from the initial condition.
Remedy: 1. Replace the PCU.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie