• Code: 724
• Description: Finisher staple hammer motor error
  Stapling does not finish within 150 ms after the staple hammer motor turned on. Staple mode cannot be used.
• Causes: • Staple jam • Stapler overload caused by trying to staple too many sheets • Staple hammer motor connector or harness loose, broken, defective • Staple hammer motor defective

• Code: 725
• Description: Finisher stack feed-out motor error
  The stack feed-out belt HP sensor did not activate within 4550 pulses after the stack feed-out motor turned on. Staple mode cannot be used.
• Causes: • Stack feed-out HP sensor defective • Stack feed-out motor overload • Stack feed-out motor defective

• Code: 726
• Description: Finisher shift tray 1 lift motor error
  Tray shift does not finish within 15 sec. after the shift motor turned on, or the stack height sensor does not activate within 15 sec. after the shift tray lift motor turned on.
• Causes: • Shift tray lift motor connector or harness loose, broken, defective • Shift tray lift motor overload due to an obstruction • Shift tray lift motor defective

• Code: 727
• Description: Finisher stapler rotation motor error
  Stapler rotation does not finish within 1100 pulses after the staple rotation motor turned on, or the stapler does not return to its home position within 1100 pulses after stapling finished.
• Causes: • Stapler rotation motor connector or harness loose, broken, defective • Motor overloaded due to an obstruction • Motor defective

• Code: 729
• Description: Finisher punch motor error
  After the punch motor is turned on, the punch HP sensor does not activate within 250 ms.
• Causes: • Punch motor harness or connector loose, broken, defective • Punch motor defective or overloaded due to obstruction • Punch HP sensor connector or harness loose, broken, defective • Punch HP sensor defective

• Code: 730
• Description: Finisher stapler positioning motor error
  After the stapler motor turned on, the stapler did not return to its home position within 5357 pulses, or the stapler HP sensor does not activate within 5357 pulses after the stapler motor turned on.
• Causes: • Stapler positioning motor connector or harness loose, broken, defective • Stapler positioning motor defective or overloaded due to an obstruction • Stapler HP sensor connector or harness loose, broken, defective • Stapler HP sensor defective

• Code: 731
• Description: Finisher exit guide motor error
  After the finisher exit guide motor turned on, the exit guide sensor did not activate within 800 ms.
• Causes: • Finisher exit guide motor defective harness or connector loose, broken, defective • Finisher exit guide motor defective • Finisher exit guide sensor defective

• Code: 732
• Description: Finisher upper tray shift motor error
  The upper tray did not reach its home position within 1.25 sec. after the upper tray shift motor turned on.
• Causes: • Upper tray shift motor connector or harness loose, broken, defective • Upper tray shift motor defective or overloaded due to an obstruction • Upper tray shift sensor connector or harness loose, broken, defective • Upper tray shift sensor defective