Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh M132 SP8300DN AL-P2 — Trang 16/20

Code: 851

Description: IEEE 1394 I/F error Driver setting incorrect and cannot be used by the 1394 I/F.
Causes: Not supported by this machine • NIB (PHY), LINK module defective; change the Interface Board Controller board defective
Remedy:

Code: 853

Description: Wireless LAN Error 1 During machine operation, the Wireless LAN device (Bluetooth) is inserted into the controller board.
Causes: Not supported by this machine • During machine operation, the Wireless LAN device (Bluetooth) is inserted into the controller board.
Remedy:

Code: 854

Description: Wireless LAN Error 2 During machine operation, the Wireless LAN device (Bluetooth) is pulled out from the controller board.
Causes: Not supported by this machine • During machine operation, the Wireless LAN device (Bluetooth) is pulled out from the controller board.
Remedy:

Code: 855

Description: Wireless LAN error An error is detected on the wireless LAN card (802.11a/g, g).
Causes: • Wireless LAN card defective • Wireless LAN card connection incorrect
Remedy:

Code: 857

Description: USB I/F Error The USB driver is not stable and caused an error.
Causes: • Bad USB card connection
Remedy: Replace the controller board

Code: 858

Description: HDD Encryption unit error 1. A serious error occurs when data is encrypted to update an encryption key with the HDD encryption unit.
Causes: -00 - Encryption key acquisition error: The controller fails to get a new encryption key. • Defective controller board Replace the controller board. -01 - Encryption key setting for HDD error: The controller fails to copy a new encryption key to the HDD. • Defective SATA chip on the controller board Replace the controller board. -02 - NVRAM data encryption error 1: An error occurs while the NVRAM data is encrypted. • Defective NVRAM on the controller board Replace the NVRAM. -30 - NVRAM data encryption error 2: An error occurs before the NVRAM data is encrypted. • Defective controller board Replace the controller board. -31 - Other error: A serious error occurs while the data is encrypted. • Same as SC991
Remedy:

Code: 859

Description: HDD Encryption unit error 2 A serious error occurs when the HDD data is encrypted to update an encryption key with the HDD encryption unit.
Causes: -01 - HDD check error: The HDD is not correctly installed. • No HDD installed • Unformatted HDD • The encryption key on the controller is different from the one on the HDD 1. Install the HDD correctly. 2. Initialize the HDD. -02 - Power failure during the data encryption: The data encryption (NVRAM and HDD) has not been completed. • Power failure during the data encryption Initialize the HDD. -10 - Data read/write error: The DMAC error is detected twice or more. • Same as SC863
Remedy:

Code: 860

Description: HDD startup error at main power on • HDD is connected but a driver error is detected. • The driver does not respond with the HDD within 30 s.
Causes: • HDD is not initialized • Label data is corrupted • Defective HDD Initialize the HDD with SP5832-001.
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie