• Code: 861
• Description: HDD re-try failure At power on, the HDD is detected. Power supply to the HDD is interrupted after the system has entered the energy save mode, but after the HDD has been awakened from the energy save mode, it does not return to the ready status within 30 sec.
• Causes: • Harness between HDD and controller board disconnected, defective • HDD power connector disconnected • HDD defective • Controller board defective
• Remedy:

• Code: 862
• Description: Bad sector number error The number of bad sectors in the HDD (image data area) goes over 101.
• Causes: • Defective HDD
• Remedy: Format the HDD with SP5832-001. Replace the HDD.

• Code: 863
• Description: HDD data read failure. The data written to the HDD cannot be read normally, due to bad sectors generated during operation. Note: [001] to [023] indicate the type of partition where the error occurred.
• Causes: • HDD defective Note: If the bad sectors are generated at the image partition, the bad sector information is written to NVRAM, and the next time the HDD is accessed, these bad sectors will not be accessed for read/write operation.
• Remedy:

• Code: 864
• Description: HDD data CRC error. During HDD operation, the HDD cannot respond to a CRC error query. Data transfer does not execute normally while data is being written to the HDD. Note: [001] to [023] indicate the type of partition where the error occurred.
• Causes: • HDD defective
• Remedy:

• Code: 865
• Description: HDD access error. HDD responded to an error during operation for a condition other than those for SC863, 864. Note: [001] to [023] indicate the type of partition where the error occurred.
• Causes: • HDD defective
• Remedy:

• Code: 866
• Description: SD card error 1: Confirmation The machine detects an electronic license error in the application on the SD card in the controller slot immediately after the machine is turned on. The program on the SD card contains electronic confirmation license data. If the program does not contain this license data, or if the result of the check shows that the license data in the program on the SD card is incorrect, then the checked program cannot execute and this SC code is displayed.
• Causes: • Program missing from the SD card • Download the correct program for the machine to the SD card
• Remedy:

• Code: 867
• Description: SD card error 2: SD card removed • The SD card in the slot is removed while the machine is on.
• Causes: Insert the SD card, then turn the machine off and on.
• Remedy:

• Code: 868
• Description: SD card error 3: SC card access
• Causes: 001, 002 An error occurs while an SD card is used. • SD card not inserted correctly • SD card defective • Controller board defective Note: If you want to try to reformat the SC card, use SD Formatter Ver 1.1.
• Remedy: