Description: Multiple feed sensor error A change in light intensity does not change the amount of light received at power ON or during initialization to reset a multiple feed error. * This error can be cleared by the panel setting [Multiple feed detection OFF].
Description: Wing motor timeout The wing HP sensor does not detect the movement of the wings from the HP when they are operated for the specified interval.
Description: Elevator motor timeout The upper limit sensor fails to activate when the elevator rising operation is activated within the specified interval.
Description: Standard paper feed tray feed failure (no paper transport) The registration sensor fails to activate when the specified number of clock inputs is issued from the belt encoder after paper transport from the standard paper feed tray begins
Description: Exit sensor paper end exiting delay The trailing edge of the paper sheet does not pass the exit sensor (sensor detecting the presence of paper) within the specified interval based on the belt encoder pulse count.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.