• Code: 0002
• Description: Sub CPU Communication Error
  Disorder of communication with Sub CPU
• Causes: Sub Board does not work correctly. Sub CPU does not work correctly. There is a bad connection between Main Board and Sub Board.

• Code: 0003
• Description: DIPSW model setting error
  A setup about the model of DIPSW is set up in an unsuitable combination.
• Causes: DIPSW setup error DIPSW defect Main Board defect

• Code: 0101
• Description: Limit Position Error
  Limit Position Initialize has not been done.
• Causes: Limit Position Initialize has not been done.

• Code: 0102
• Description: Head Lock Sensor Error
  Even though the machine carries out the regular movement, the output of the Head Lock Sensor does not reach the expected value.
• Causes: Head Lock Sensor does not work correctly or is broken.

• Code: 0103
• Description: Limit Sensor Error
  Even though the machine carries out the regular movement, the output of the Limit Sensor does not reach the expected value.
• Causes: Limit Sensor does not work correctly or is broken.

• Code: 0104
• Description: Cap Unit Protection Error
  Even though the machine carries out the regular movement, the output of Cap Sensor does not reach the expected value.
• Causes: Disorder of Cap Motor Fault of Cap Unit Fault of Cap Sensor Cut-line or short-circuit of Cable and Flexible Cable

• Code: 0105
• Description: Tool Carriage Connection Error
  Machine fails to connect the Tool Carriage to the Head Carriage.
• Causes: Fault of Tool Carriage Connection Loose of Connection Part Fault of the Limit Position Initialize value Limit Sensor does not work correctly or is broken.

• Code: 0106
• Description: Tool Carriage Disconnection Error
  Machine fails to disconnect the Tool Carriage from the Head Carriage.
• Causes: Disorder of Cap Motor Loose of Connection Part Fault of the Limit Position Initialize value Limit Sensor does not work correctly or is broken.