Code :

Code: A1-1110
Display: Error #A1-1110 Turn off then on
Description: The main motor does not operate.
Remedy: 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Remove the rear and right cover. 3) Check if the connection between main board and main motor are correct. 4) If the connection is OK, replace the main motor. 5) If the problem persists, replace the main board.

Code: A3-2210
Display: Error #A3-2210 Call for service
Description: The CTD sensor has a problem.
Remedy: 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Check the CTD sensor connector. If the connection is OK, replace the CTD sensor board.

Code: A3-3312
Display: Error #A3-3312 Call for service
Description: The outer temperature sensor is defective.
Remedy: 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Remove the front cover. 3) Disassemble the front cover and replace the PBA-DEVE CRUM JOINT that includes the outer temperature sensor.

Code: A3-6110
Display: Deve Home Sensor Error
Description: The deve home sensor is defective.
Remedy: 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Remove the right cover. 3) Check the connection between the deve home sensor and connection board. 4) If the connection is OK, replace the deve home sensor.

Code: C1-2110, C1-3110
Display: Prepare Toner
Description: The remaining toner cartridge is less than 10%
Remedy: 1) Print the supply information report. Check the life remaining of the toner cartridge. 2) If its life is at the end, turn the machine off and replace the toner cartridge with new one.

Code: C1-2411, C1-3411
Display: Install toner
Description: The toner cartridge is not installed or the CRUM has some problem.
Remedy: 1) Check if the toner cartridge is installed properly. Turn the machine off then on. 2) If the error message is not disappear, remove the toner cartridge. Thoroughly roll the cartridge five or six times to distribute the toner evenly inside the cartridge. And reinstall the toner cartridge. 3) If the problem persists, check that the CRUM contact area is contaminated. Clean it. 4) If the problem persists, replace the toner cartridge with new one.

Code: C1-2512, C1-2514, C1-3512
Display: Not compatible (Color) toner
Description: Toner cartridge is not compatible.
Remedy: 1) If the toner cartridge is not a Samsung genuine toner cartridge, replace with new one.

1 2 3 4 > Last ›