Danh mục sản phẩm

Code :

Code: 44
Display: Supplying and mixing toner to [Color] imaging unit... Please wait
Description: Supplying and mixing toner to [black] imaging unit
Remedy: Wait until the message is disappeared.

Code: 45
Display: This IP address conflicts with an IP address already in use. Check it
Description: The IP address is used in other place elsewhere.
Remedy: Check the IP address or obtain a new IP address.

Code: 46
Display: Too much paper in finisher stacker. Remove printed paper
Description: The stacker is full of printouts.
Remedy: Remove the printed paper.

Code: 47
Display: Too much paper in output bin tray. Remove printed paper
Description: The printed papers are full on the output tray.
Remedy: 1. Remove the paper on the output tray. 2. Check the Outbin Full Senosr (Component Test -> Sensor Read -> OB)

Code: 48
Display: Top door of scanner is open
Description: 1. DADF door is open during DADF driving. 2. Platen Door is open during DADF driving.
Remedy: 1. Open the DADF door. And remove the jammed paper. Close the DADF door. 2. Open the platen door and remove the jammed paper. 3. Open the reverse stack dooor and remove the jammed paper. 4. Check the paper exit.

Code: 49
Display: Top door of scanner is open
Description: DADF door is open
Remedy: 1. Close the DADF door.

Code: 50
Display: Tray2 door is open. Close it Tray2(HCF) door is open. Close it
Description: Tray2 or HCF door is open.
Remedy: 1. Open and close the door. If the message is not disappeared, check the below steps. 2. Check that the door switch is pushed. 3. Check that the Ui message is chaged by door switch action. 4. Check the door switch signal on EDC mode.

Code: 51
Display: Tray3 door is open. Close it
Description: Tray3 door is open. Close it
Remedy: 1. Open and close the door. If the message is not disappeared, check the below steps. 2. Check that the door switch is pushed. 3. Check that the Ui message is chaged by door switch action. 4. Check the door switch signal on EDC mode.

‹ First < 7 8 9 10

0