Description: 1. Paper has jammed. (The paper has not reached the feed1 sensor within normal time after picking up it from the tray.)
Remedy: 1. Remove all papers on the tray. Remove the jammed paper from the machine. And reload the papers on the tray. 2. Adjust the paper guide to fix the papers. 3. Check the maximum paper capacity of the tray. Remove excess paper from the tray.
Description: 1. Paper has jammed. (In case that the printer has turned on after turned it off for printing job or pick-up.)
Remedy: 1. Open the top cover. Check if the paper has jammed. If there is the jammed paper, remove it. 2. If the error message in Smart Panel is not disappered, check the Regi sensor and actuator. If they are defective, replace them.