• Code: 01
• Display: Defective PC Scan
• Description: The PC Scan is not functioning at all.
• Causes: 1. Check the Cable (USB or Parallel) 2. Check if the driver is installed properly. 3. Check if copy function operation normally.

• Code: 02
• Display: Defective Image Quality of PC Scan
• Description: The image PC scanned is not clear or bad.
• Causes: 1. Check the waveform form by performing a CCD test in TECH mode. (Refer to 4-2-5) 2. Check if the resolution is set too low in PC Scan options. (Refer to User's Manual.)

• Code: 03
• Display: Defective Operation Display
• Description: Strange characters are displayed on the OPE Panel and buttons are not operated.
• Causes: 1. Clear the memory. 2. Check if the OPE Harness is connected to the Main Board correctly.

• Code: 04
• Display: No Power
• Description: While the power S/W is turned on, it does not work at all.
• Causes: 1. Check if the connection of power code is normal. 2. Check if DC +3.3V and +30V is supplied to the POWER ASS’Y from MAIN Board.

• Code: 05
• Display: Defective LCD Operation
• Description: The LCD screen is not turned on or has a strange display.
• Causes: 1. Clear the memory. (Refer to page 4-2-4). 2. Confirm to catch a click sound, while a key on the OPE Panel is pressed on. 3. Check the status of Harness between LCD and OPE Panel, replace in order of the Main Board.

• Code: 06
• Display: Defective Operation of Key Button
• Description: The button of the OPE Panel is not operated.
• Causes: 1. Confirm to catch a click sound while the key is pressed on. 2. Check if a specific key is pressed by another equipment

• Code: 07
• Display: Paper Jam
• Description: The paper is jammed inside the set and not exited from.
• Causes: 1. Check if the paper is crumpled or preprinted. 2. Check if too many sheets of recording paper are put into ASF (Automatic Sheet Feeder). (Standard : up to 100 sheets). 3. Check if the remaining papers are stuck in the Frame Base

• Code: 08
• Display: Defective Paper Feed (1)
• Description: A recording paper is tilted while feeding.
• Causes: 1. Check if the paper guide of ASF(Automatic Sheet Feeder) is set up properly with the width of recording paper. 2. Check if too many sheets of recording paper are put into ASF (Automatic Sheet Feeder). (Standard: up to 100 sheets). 3. Check if the recording paper is crumpled or preprinted.