• Code: F0-51
• Description: Finisher trimmer cutter motor abnormality (FTM106) The cutter operation of the trimmer unit is abnormal.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the trimmer cutter motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-52
• Description: Finisher trimmer registration motor section abnormality (FTM102) The operation of the registration taking unit of the trimmer unit is abnormal.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the trimmer registration motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-53
• Description: Finisher trimmer inlet port separation motor abnormality (FTM103) The separation operation of the inlet port roller of the trimmer unit is abnormal.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown
• Remedy: Use SIM3-3 to check the operation of the trimmer inlet port separation motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-54
• Description: Finisher trimmer paper exit separation motor section abnormality (FTM104) The separation operation of the paper exit roller of the trimmer unit is abnormal.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the trimmer paper exit separation motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-55
• Description: Finisher trimmer bundle press motor section abnormality (FTM105) The nip and separation operations of the bundle press roller of the trimmer unit are abnormal.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the trimmer bundle press motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-56
• Description: Paper remaining trouble in the finisher trimmer. Paper bundle remained in the trimmer is not discharged by the automatic paper exit operation.
• Causes: Trimmer inlet port sensor breakdown The paper bundle is bent and cannot be transported.
• Remedy: Use SIM3-3 to check the operation of the trimmer transport motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part. Check the paper bundle can be transported or not.

• Code: F0-70
• Description: Communication trouble between the finisher and the folding unit Communication trouble between the finisher and the folding unit. No response for a command from the folding unit.
• Causes: Noise on the communication line, control PWB trouble, disconnection of connector or harness
• Remedy: Turn OFF/ON the power. Check connection between the finisher and the folding unit. Replace the control PWB of the folding unit.

• Code: F0-71
• Description: Folding unit lead edge holding guide motor section abnormality (FLM10). The operations of the folding unit lead edge holding guide is abnormal.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the folding unit lead edge holding guide motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.