• Code: F0-30
• Description: Communication trouble between the finisher and the saddle. Communication trouble between the finisher and the saddle No response for the command send from the saddle unit
• Causes: Noise on the communication line, control PWB trouble, disconnection of connector or harness
• Remedy: Turn OFF/ON the power. Check the connector between the finisher and the saddle. Replace the control PWB of the saddle unit

• Code: F0-31
• Description: Finisher saddle folding motor section abnormality (FSM206). Saddle unit folding roller operation abnormality
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown
• Remedy: Use SIM3-3 to check the operation of the saddle paper folding motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-32
• Description: Finisher relay unit transport motor section abnormality (PIM301). The operation of the paper transport in the paper relay unit of the finisher is abnormal.
• Causes: Motor lock, motor harness short/open, control PWB trouble, disconnection of harness or connector.
• Remedy: Use SIM3-3 to check the operation of the relay paper transport motor. Check connection from the control PWB to the motor. Turn OFF/ON the power. Replace the control PWB and the motor.

• Code: F0-33
• Description: Finisher punch shift motor section abnormality (FCM101). The horizontal registration shift operation of the punch unit in the finisher is abnormal.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the punch shift motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-34
• Description: Finisher punch motor section abnormality (FCM102). The punching operation of the punch unit in the finisher is abnormal.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the punch motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-37
• Description: Finisher backup RAM trouble. Data cannot be written into the backup RAM. The red values are abnormal.
• Causes: Finisher control PWB trouble, EEPROM chip breakdown.
• Remedy: Replace the finisher control PWB.

• Code: F0-40
• Description: Communication trouble between the finisher saddle and the trimmer. Communication trouble between the saddle unit and the trimmer unit. When a command is sent from the saddle unit to the trimmer unit, no response is made by the trimmer unit
• Causes: Noise on the communication line, control PWB trouble, disconnection of connector or harness.
• Remedy: Turn OFF/ON the power. Check the connector between the saddle and the trimmer unit. Replace the control PWB of the saddle unit. Replace the control PWB of the trimmer unit.

• Code: F0-41
• Description: Finisher saddle lead edge stopper motor section abnormality (FSM203). The operation of the finisher saddle unit lead edge stopper motor is abnormal.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the saddle lead edge stopper motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.