• Code: F0-03
• Description: Finisher paper exit roller lift motor section abnormality (FNM110)
  Finisher paper exit roller lifting operation abnormality.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the paper exit roller lift motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-08
• Description: Finisher stapler shift motor section abnormality (FNM107)
  The shift operation of the finisher stapler is abnormal.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the stapler shift motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-10
• Description: Finisher staple motor section abnormality (FNM115)
  The operation of the finisher staple is abnormal.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the staple motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-11
• Description: Finisher bundle exit motor section abnormality (FNM116)
  The grip expansion arm drive motor of the finisher for staple bundle exit is abnormal. HP sensor abnormality.
• Causes: Motor lock, motor harness short/open, control PWB trouble, HP sensor breakdown, disconnection of harness or connector.
• Remedy: Use SIM3-3 to check the operation of the gripper arm motor (FNM116). Check connection from the control PWB to the motor. Replace the control PWB and the sensor part.

• Code: F0-14
• Description: Finisher paper rear edge falling motor section abnormality (FNM113)
  The rear edge falling operation in the staple compiler of the finisher is abnormal.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the rear edge falling motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-15
• Description: Finisher tray lift motor section abnormality (FNM106)
  The operation of the lift motor for the upper and the lower trays of the finisher is abnormal.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, area sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the upper tray lift motor and the lower tray lift motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, and motor, and the sensor part.

• Code: F0-18
• Description: Finisher rear edge hold motor section abnormality (FNM118)
  The operation of the paper hold arm in the staple compiler of the finisher is abnormal.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the paper hold motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-19
• Description: Finisher paper alignment motor F section abnormality (FNM108)
  The operation of the front alignment plate in the staple compiler of the finisher is abnormal.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the paper alignment motor F. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.