• Code: E714
• Description: Jam due to document removal – In the middle of feeding for a simplex document scan, the document set sensor becomes inactive. (Simplex and Duplex)
• Causes:
• Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.

• Code: E715
• Description: Activation of the hopping sensor at document reversal – The hopping sensor becomes active when the reverse paper sensor is inactive. Multifeed of documents is detected. (Duplex)
• Causes:
• Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.

• Code: E721
• Description: Jam due to non-arrival at the scan sensor – Although the fed document is transferred to a certain distance, the scan sensor does not become active. (Simplex and Duplex)
• Causes:
• Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.

• Code: E722
• Description: Regist paper sensor stuck jam/detection of out-of-spec oversized documents – Once the regist paper sensor becomes active, it does not become inactive when the fed document is transferred to the distance exceeding the maximum page size. (Simplex and Duplex)
• Causes:
• Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.

• Code: E723
• Description: Detection of out-of-spec undersized documents – Once the regist paper sensor becomes active, it becomes inactive before the fed document is transferred by the distance equal to the minimum page size. (Simplex and Duplex)
• Causes:
• Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.

• Code: E724
• Description: Scan sensor stuck jam – The scan sensor does not become inactive even when the fed document is transferred by 60mm after the regist paper sensor becomes inactive. (Simplex and Duplex)
• Causes:
• Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.

• Code: E725
• Description: Detection of a too little space between documents – Before the document is transferred by 31mm after the regist paper sensor becomes inactive, the sensor becomes active. Detection of a too little space between the documents. (Simplex)
• Causes:
• Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.

• Code: E726
• Description: Activation of the reverse paper sensor for the documents not to be reversed – Switching to the first separator is not carried out normally causing activation of the reverse paper sensor. (Simplex and Duplex) • The reverse paper sensor becomes active in feeding of a simplex document. • The reverse paper sensor becomes active between reversal to the back and activation of the regist paper sensor.
• Causes:
• Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.