Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Xerox Phaser 6180 — Trang 2/12

Code: 016-610

Description: Control Panel Language Set Unsupported The Control Panel does not support the language. The following troubleshooting procedure applies to this error.
Causes: • MCU Board, PL9.2.13
Remedy: 1 1. Turn the printer power Off and back On. 2. Does the error still occur? Replace the MCU Board. Complete.

Code: 016-611

Description: Engine Model Mismatch Printer Engine model does not match. The following troubleshooting procedure applies to this error.
Causes: • MCU Board, PL9.2.13
Remedy: 1 1. Turn the printer power Off and back On. 2. Does the error still occur? Replace the MCU Board. Complete.

Code: 016-718, 016-982

Description: Out of Memory/Hard Drive Full The printer memory is full and cannot continue to print. Print job requires additional memory. The following troubleshooting procedure applies to these errors. • Chain Link 016-718: Out of memory • Chain Link 016-982: Hard Drive Full (Disk Full)
Causes: • Image Processor Board, PL9.1.20 • Memory Card (Option), PL9.1.22
Remedy: 1 1. Check the required memory for the print job. 2. Print a small size file (example as a Windows test print). 3. Does the error still occur? Go to step 2. Add memory card or separate the print job. 2 1. Reseat the memory card. 2. Does the error still occur? Go to step 3. Complete. 3 1. Check the memory card capacity. Print the printer Configuration Page: System > Information Pages > Configuration. 2.Does the memory meet the print job requirements? Go to step 4. Replace the Image Processor Board. 4 1. Replace the memory card. 2. Does the error still occur? Replace the Image Processor Board. Complete.

Code: 016-720

Description: PDL Error PDL Error has occurred. The following troubleshooting procedure applies to this error.
Causes: • Image Processor Board, PL9.1.20
Remedy: 1 Check the print job. 1. Print a small print job (example as a Windows test print). 2. Does the error still occur? Go to step 2. Complete. 2 1. Reseat the Image Processor Board. 2. Does the error still occur? Replace the Image Processor Board. Complete.

Code: 016-737

Description: Format Error The format is invalid. The following troubleshooting procedure applies to this error.
Causes: • Image Processor Board, PL9.1.20
Remedy: 1 1. Check the printer firmware. 2. Does the firmware have the correct version? Go to step 2. Update the firmware. 2 1. Check the Image Processor Board for correct installation. Reseat the Image Processor Board. 2. Does the error still occur? Replace the Image Processor Board. Complete.

Code: 016-738

Description: MPC Error MPC download has failed to start MPC download. The following troubleshooting procedure applies to this error.
Causes: • Image Processor Board, PL9.1.20 • Multi-Protocol Network Card (Option), PL9.1.23
Remedy: 1 1. Check the Multi-Protocol Network Card (MPC) for correct installation. 2. Is the MPC installed on the Image Processor Board? Go to step 2. Install the MPC. Go to step 2. 2 1. Check the firmware for the MPC. 2. Does the firmware have the correct version? Go to step 3. Update the firmware. 3 1. Check the MPC for correct installation. Reseat the MPC. 2. Does the error still occur after the firmware has been updated? Go to step 4. Complete. 4 1. Check the Image Processor Board for correct installation. Reseat the Image Processor Board. 2. Does the error still occur after the firmware has been updated? Go to step 5. Complete. 5 1. Replace the MPC. 2. Does the error still occur when the printer is turned On? Replace the Image Processor Board. Complete.

Code: 016-739

Description: Reseat MPC Error MPC download was attempted without MPC installed. The following troubleshooting procedure applies to this error.
Causes: • Image Processor Board, PL9.1.20 • Multi-Protocol Network Card (Option), PL9.1.23
Remedy: 1 1. Check the Multi-Protocol Network Card (MPC) for correct installation. 2. Is the MPC installed on the Image Processor Board? Go to step 2. Install the MPC. Go to step 2. 2 1. Check the firmware for the MPC. 2. Does the firmware have the correct version? Go to step 3. Update the firmware. 3 1. Check the MPC for correct installation. Reseat the MPC. 2. Does the error still occur after the firmware has been updated? Go to step 4. Complete. 4 1. Check the Image Processor Board for correct installation. Reseat the Image Processor Board. 2. Does the error still occur after the firmware has been updated? Go to step 5. Complete. 5 1. Replace the MPC. 2. Does the error still occur when the printer is turned On? Replace the Image Processor Board. Complete.

Code: 016-740

Description: MPC Communication Error Communication error has occurred between the MPC and the Controller during download. The following troubleshooting procedure applies to this error.
Causes: • Image Processor Board, PL9.1.20 • Multi-Protocol Network Card (Option), PL9.1.23
Remedy: 1 1. Check the Multi-Protocol Network Card (MPC) for correct installation. 2. Is the MPC installed on the Image Processor Board? Go to step 2. Install the MPC. Go to step 2. 2 1. Check the printer firmware. 2. Does the firmware have the correct version? Go to step 3. Update the firmware. 3 1. Check the MPC for correct installation. Reseat the MPC. 2. Does the error still occur after the firmware has been updated? Go to step 4. Complete. 4 1. Check the Image Processor Board for correct installation. Reseat the Image Processor Board. 2. Does the error still occur after the firmware has been updated? Go to step 5. Complete. 5 1. Replace the MPC. 2. Does the error still occur when the printer is turned On? Replace the Image Processor Board. Complete.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie