Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Xerox WorkCentre 5022 — Trang 8/18

Code: 024-954

Description: MSI No Paper Any of the following was detected: • The paper in the MSI has ran out. (When the ATS function of MSI is disabled) • Although the paper in the MSI was detected to have ran out, paper is not supplied from another Tray. (When the ATS function of MSI is enabled)
Remedy: 1. Load paper into the MSI. (If this had occurred during ATS of Tray 1 or Tray 2, load paper with the same settings as for the applicable Tray into other than MSI.) 2. If the problem persists, check the following: • The paper supply mechanism of the MSI for damage and foreign substances. • The MSI No Paper Sensor (Input Check [072-104] for operation failure. (PL 13.3) • The MSI No Paper Sensor for contamination, improper installation, and Actuator operation failure. 3. If no problem is found, replace the following parts: • ESS/MCU PWB (PL 18.3)

Code: 024-958, 024-959, 024-960

Description: MSI/Tray 1/Tray 2 Paper Size Mismatch During Print Job, the paper size settings of the selected Tray is different from the paper size specified for the Job.
Remedy: Change the paper settings of the selected Tray to the appropriate one.

Code: 024-961

Description: Tray 3 Paper Size Mismatch During Print Job, the paper size settings of the selected Tray is different from the paper size specified for the Job.
Remedy: Change the paper settings of the selected Tray to the appropriate one.

Code: 024-962

Description: Tray 4 Paper Size Mismatch During Print Job, the paper size settings of the selected Tray is different from the paper size specified for the Job.
Remedy: Change the paper settings of the selected Tray to the appropriate one.

Code: 024-965

Description: APS NG Unselected During Copy Job, Print Job, and Report Job with APS settings, the Paper Size and paper orientation (SEF/LEF) settings specified by the Job are different from the settings at Tray 1, Tray 2, Tray 3, Tray 4 and MSI
Remedy: Change the paper settings of the Tray to the appropriate one.

Code: 024-966

Description: APS NG Permission Denied Although APS was selected during Copy Job or Print Job, all the Trays are either prohibited for APS or malfunctioning.
Remedy: • Repair any Tray that is malfunctioning. • Release the APS prohibition setting. NVM 780-61: STM NVM 780-62: Tray 3 NVM 780-63: Tray 4 NVM 780-64: MSI

Code: 033-313

Description: Fax Board Communication Fail Communication failure with Fax Board was detected.
Remedy: 1. Turn the power OFF and ON. 2. Check the connection of the Fax Board Cable. 3. If the problem persists, replace the following parts in sequence: • Fax Board Cable (PL 18.5) • Fax PWB (PL 18.5)

Code: 033-316

Description: Fax Box NVM Data Defect The NVM data of the Fax Board is corrupted.
Remedy: 1. Turn the power OFF and ON. 2. Perform NVM Initialize in the CE Mode. For details on the NVM Initialize, refer to '6.5.2.4 NVM Initialize'.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie