• Code: 005-147
• Description: DADF Pre Registration Sensor Off Jam (Invert) RAP After the DADF Registration Motor turned ON at Invert, the DADF Pre Registration Sensor did not turn OFF within the specified time.
• Remedy: Check the following: • Transportation failure due to foreign substance in the document path • The surface of the roll for foreign substance • The surface of the roll for wear • Check the sw version of the controller sw - update if required. • DADF Registration Motor: Component Control [005-033] (PL 51.5) • DADF Feed Motor: Component Control [005-010] (PL 51.5) • Check the circuit between the DADF Pre Registration Sensor and the DADF PWB • DADF Pre Registration Sensor: Component Control [005-206] (PL 51.17) • DADF PWB failure. (PL 51.2)

• Code: 005-194
• Description: Size Mismatch Jam On SS Mix-Size RAP In Slow Scan (SS) Mixed mode, it was detected that the size in the Fast Scan Direction was different from the width of the document guide.
• Remedy: Check the following: • Check that the DADF Tray Set Guide operates normally. • Check the circuit between the DADF Tray Set Guide Sensors 1-3 and the DADF PWB • DADF Tray Set Guide Sensors 1-3: Component Control [005-215/216/217] (PL 51.10)

• Code: 005-196
• Description: Size Mismatch Jam On No Mix-Size RAP A document in a different size from the first document was detected in the No Mix mode.
• Remedy: Check the following: • DADF Tray Set Guide Sensors 1-3: Component Control [005-215/216/217] (PL 51.10) • DADF APS Sensor 1: Component Control [005-218] (PL 51.17) • Document Tray Size Sensor 1/2: Component Control [005-221/222] (PL 51.10) • Check the sw version of the controller sw - update if required (GP 16). • If no problems are found, replace the DADF PWB (PL 51.2).

• Code: 005-197
• Description: Prohibit Combine Size Jam RAP. A prohibited size combination was detected.
• Remedy: Explain to the customer that the following combinations are prohibited. • 5.5 x 8.5 SEF and all the other document sizes. • A5 SEF and all the other document sizes. • B5 SEF, plus 11 x 15 SEF, 11 x 17 SEF, A4 LEF, A3 LEF, 8.5 x 11 LEF.

• Code: 005-198
• Description: Too Short Size Jam RAP It was detected that the document length in Slow Scan direction was out of the specifications. • Simplex mode: shorter than 85mm • Duplex mode: shorter than 110mm
• Remedy: Check the document size a user has scanned. If its length is within the available range for DADF feeding, check the circuit between the DADF Pre Registration Sensor, the DADF Feed Out Sensor, and the DADF PWB. Check the sw version of the controller sw - update if required (GP 16). If no problems are found, replace the DADF PWB (PL 51.2).

• Code: 005-199
• Description: Too Long Size Jam RAP It was detected that the document length in Slow Scan direction was out of the specifications. • Simplex and Duplex modes: 431.9mm or longer • Fax mode: 1501.0mm or longer
• Remedy: Check the document size a user has scanned. If its length is within the available range for DADF feeding, check the circuit between the DADF Pre Registration Sensor, the DADF Feed Out Sensor, and the DADF PWB. Check the sw version of the controller sw - update if required (GP 16). If no problems are found, replace the DADF PWB (PL 51.2).

• Code: 005-210
• Description: DADF Download Fail RAP When the IISS starts up (Power ON/Sleep recovery), it was detected that the DADF is in Download Mode.
• Remedy: Complete the DADF software download.

• Code: 005-305
• Description: DADF Feeder Cover Interlock Open (when running) RAP The Feeder Cover Interlock was opened during DADF operation.
• Remedy: Check the following: • The DADF Feeder Cover for misalignment or damage. • DADF Interlock Switch: Component Control [005-212] (PL 51.5) • Check the sw version of the controller sw - update if required • If the problem persists, check the circuit between the DADF Interlock Switch and the DADF PWB. If no problems are found, replace the DADF PWB (PL 51.2).