• Code: 005-131
• Description: DADF Invert Sensor On Jam (During Invert) RAP After the DADF Registration Sensor turned ON at Invert, the DADF Invert Sensor did not turn ON within the specified time.
• Remedy: Check the following: • Transportation failure due to foreign substance in the document path • The surface of the roll for foreign substance • The surface of the roll for wear • Check the sw version of the controller sw - update if required. • DADF Registration Motor: Component Control [005-033] (PL 51.5) • Check the circuit between the DADF Registration Sensor and the DADF PWB • Check the circuit between the DADF Inverter Sensor and the DADF PWB • DADF Registration Sensor: Component Control [005-110] (PL 51.17) • DADF Invert Sensor: Component Control [005-211] (PL 51.9) • DADF PWB failure. (PL 51.2)

• Code: 005-132
• Description: DADF Invert Sensor On Jam RAP After the Read Speed Control operation started (DADF Registration Motor On (CCW)), the DADF Invert Sensor did not turn ON within the specified time.
• Remedy: Check the following: • Transportation failure due to foreign substance in the document path • The surface of the roll for foreign substance • The surface of the roll for wear • Check the sw version of the controller sw - update if required. • DADF Registration Motor: Component Control [005-033] (PL 51.5) • Check the circuit between the DADF Inverter Sensor and the DADF PWB • DADF Invert Sensor: Component Control [005-211] (PL 51.9) • DADF PWB failure. (PL 51.2)

• Code: 005-134
• Description: DADF Inverter Sensor Off Jam (During Invert) RAP • After the DADF Registration Sensor turned OFF at Invert of the last document, the DADF Inverter Sensor did not turn OFF within the specified time. • During the Invert where there is a next document, after the Read Speed Control operation started (DADF Registration Motor On (CCW)), the DADF Inverter Sensor did not turn OFF within the specified time.
• Remedy: Check the following: • Transportation failure due to foreign substance in the document path • The surface of the roll for foreign substance • The surface of the roll for wear • Check the sw version of the controller sw - update if required. • DADF Registration Motor: Component Control [005-033] (PL 51.5) • Check the circuit between the DADF Registration Sensor and the DADF PWB • Check the circuit between the DADF Inverter Sensor and the DADF PWB • DADF Registration Sensor: Component Control [005-110] (PL 51.17) • DADF Invert Sensor: Component Control [005-211] (PL 51.9) • DADF PWB failure. (PL 51.2)

• Code: 005-135
• Description: DADF Side 2 Pre Registration Sensor On Jam RAP After the Invert operation started (DADF Registration Motor On (CW)) at Invert, the DADF Pre Registration Sensor did not turn ON within the specified time.
• Remedy: Check the following: • Transportation failure due to foreign substance in the document path • The surface of the roll for foreign substance • The surface of the roll for wear • Check the sw version of the controller sw - update if required. • DADF Registration Motor: Component Control [005-033] (PL 51.5) • Check the circuit between the DADF Pre Registration Sensor and the DADF PWB • DADF Pre Registration Sensor: Component Control [005-206] (PL 51.17) • DADF PWB failure. (PL 51.2) • The Gate Solenoid Component Control [005-090] for operation failure • Check if the Exit Roll is nipping properly. (Including the operations of Exit Nip Release Solenoid (Component Control [005-072])) (PL 51.6).

• Code: 005-136
• Description: DADF Side 2 Registration Sensor On Jam RAP After the DADF Pre Registration Sensor turned ON at Invert, the DADF Registration Sensor did not turn ON within the specified time.
• Remedy: Check the following: • Transportation failure due to foreign substance in the document path • The surface of the roll for foreign substance • The surface of the roll for wear • Check the sw version of the controller sw - update if required. • Check if the Exit Roll is nipping properly. (Including the operations of Exit Nip Release Solenoid (Component Control [005-072])) (PL 51.6) • Check the circuit between the DADF Pre Registration Sensor and the DADF PWB • DADF Pre Registration Sensor: Component Control [005-206] (PL 51.17) • Check the circuit between the DADF Registration Sensor and the DADF PWB • DADF Registration Sensor: Component Control [005-110] (PL 51.17) • DADF Feed Motor: Component Control [005-008] (PL 51.5) • DADF PWB failure. (PL 51.2)

• Code: 005-139
• Description: DADF Invert Sensor Off Jam RAP • After the DADF Registration Sensor turned OFF in the Scan operation, the DADF Invert Sensor did not turn OFF within the specified time. • During the 1 Sided mode scan operation where there is a next document, after the Next Document Scan Read Speed Control started (DADF Registration Motor On (CCW)), the DADF Inverter Sensor did not turn OFF within the specified time.
• Remedy: Check the following: • Transportation failure due to foreign substance in the document path • The surface of the roll for foreign substance • The surface of the roll for wear • Check the sw version of the controller sw - update if required. • The Gate Solenoid Component Control [005-090] for operation failure • DADF Registration Motor: Component Control [005-033] (PL 51.5) • Check if the Exit Roll is nipping properly. (Including the operations of Exit Nip Release Solenoid (Component Control [005-072])) (PL 51.6) • Check the circuit between the DADF Registration Sensor and the DADF PWB • DADF Registration Sensor: Component Control [005-110] (PL 51.17) • Check the circuit between the DADF Inverter Sensor and the DADF PWB • DADF Invert Sensor: Component Control [005-211] (PL 51.9) • DADF PWB failure. (PL 51.2)

• Code: 005-145
• Description: DADF Registration Sensor Off Jam (Invert) RAP After the DADF Pre Registration Sensor turned OFF at Invert, the DADF Registration Sensor did not turn OFF within the specified time.
• Remedy: Check the following: • Transportation failure due to foreign substance in the document path • The surface of the roll for foreign substance • The surface of the roll for wear • Check the sw version of the controller sw - update if required. • DADF Registration Motor: Component Control [005-033] (PL 51.5) • DADF Feed Motor: Component Control [005-008] (PL 51.5) • Check the circuit between the DADF Registration Sensor and the DADF PWB • DADF Registration Sensor: Component Control [005-110] (PL 51.17) • Check the circuit between the DADF Pre Registration Sensor and the DADF PWB • DADF Pre Registration Sensor: Component Control [005-206] (PL 51.17) • DADF PWB failure. (PL 51.2)

• Code: 005-146
• Description: DADF Pre Registration Sensor Off Jam RAP After the DADF Feed Out Sensor turned OFF in 1 Sided mode, the DADF Pre Registration Sensor did not turn OFF within the specified time.
• Remedy: Check the following: • Transportation failure due to foreign substance in the document path • The surface of the roll for foreign substance • The surface of the roll for wear • Check the sw version of the controller sw - update if required. • DADF Registration Motor: Component Control [005-033] (PL 51.5) • DADF Feed Motor: Component Control [005-010] (PL 51.5) • Check if the Exit Roll is nipping properly. (Including the operations of Exit Nip Release Solenoid (Component Control [005-072])) (PL 51.6) • Check the circuit between the DADF Pre Registration Sensor and the DADF PWB • DADF Pre Registration Sensor: Component Control [005-206] (PL 51.17) • DADF PWB failure. (PL 51.2)