• Code: 311-130-00-110, 311-132-00-110
• Description: Paper Exiting to Bin 0 RAP 311-130-00-110 The leading edge of the sheet is late to the top exit sensor. 311-132-100-10 The trailing edge of the sheet is late from the top exit sensor.
• Remedy: NOTE: All 2K LCSS interlocks must be made to supply +24V to the motors. Enter dC330 code 011-001 to run transport motor 2, MOT11-001. MOT11-001 runs. Y↓N→Go to Flag 3. Check MOT11-001. Refer to: • 311G-110 2K LCSS PWB Damage RAP. • GP 10, How to Check a Motor. • P/J309, 2K LCSS PWB. • 311D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Transport motor 2, PL 11.22 Item 5. • 2K LCSS PWB, PL 11.26 Item 1. Enter dC330 code 011-002 to energize the diverter gate solenoid, SOL11-002. SOL11-002 energizes. Y↓N→Go to Flag 2. Check SOL11-002. Refer to: • 311G-110 2K LCSS PWB Damage RAP. • GP 12, How to Check a Solenoid. • P/J306, 2K LCSS PWB. • 311D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Diverter gate solenoid, PL 11.22 Item 12. • 2K LCSS PWB, PL 11.26 Item 1. Enter dC330 code 011-130, actuate the top exit sensor, Q11-130. The display changes. Y↓N→Go to Flag 1. Check Q11-130. Refer to: • 311G-110 2K LCSS PWB Damage RAP. • GP 11, How to Check a Sensor. • P/J313, 2K LCSS PWB. • 311D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Top exit sensor, PL 11.22 Item 11. • 2K LCSS PWB, PL 11.26 Item 1. Enter dC330 code 011-000 to energize the transport motor 1, MOT11-000. MOT11- 000 runs. Y↓N→Go to Flag 4. Check MOT11-000. Refer to: • 311G-110 2K LCSS PWB Damage RAP. • GP 10, How to Check a Motor. • P/J305, 2K LCSS PWB. • 311D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Transport motor 1, PL 11.14 Item 2. • 2K LCSS PWB, PL 11.26 Item 1. Perform SCP 5 Final Actions.

• Code: 311-130-00-120, 311-132-00-120
• Description: Paper Exiting to Bin 0 RAP 311-130-00-120 The leading edge of the sheet is late to the top exit sensor. 311-132-00-120 The trailing edge of the sheet is late from the top exit sensor.
• Remedy: NOTE: All 1K LCSS interlocks must be made to supply +24V to the motors. Enter dC330 code 011-001 transport motor 2, MOT11-001. MOT11-001 runs. Y↓N→Go to Flag 3. Check MOT11-001. Refer to: • 311F-120 1K LCSS PWB Damage RAP. • GP 10, How to Check a Motor. • P/J16, 1K LCSS PWB. • 311C-120 1K LCSS Power Distribution RAP. Install new components as necessary: • Transport motor 2, PL 11.120 Item 13. • 1K LCSS PWB, PL 11.124 Item 1. NOTE: The diverter gate solenoid remains energized for 5 seconds. Enter dC330 code 011-002 diverter gate solenoid, SOL11-002. SOL11-002 energizes. Y↓N→Go to Flag 2. Check SOL11-002. Refer to: • 311F-120 1K LCSS PWB Damage RAP. • GP 12, How to Check a Solenoid. • P/J13, 1K LCSS PWB • 311C-120 1K LCSS Power Distribution RAP. Install new components as necessary: • Diverter gate solenoid, PL 11.118 Item 12. • 1K LCSS PWB, PL 11.124 Item 1. Enter dC330 code 011-130, top exit sensor, Q11-130. Actuate Q11-130. The display changes. Y↓N→Go to Flag 1. Check Q11-130. Refer to: • 311F-120 1K LCSS PWB Damage RAP. • GP 11, How to Check a Sensor. • P/J2, 1K LCSS PWB • 311C-120 1K LCSS Power Distribution RAP. Install new components as necessary: • Top exit sensor, PL 11.118 Item 11. • 1K LCSS PWB, PL 11.124 Item 1. Enter dC330 code 011-000, transport motor 1, MOT11-000. MOT11-000 runs. Y↓N→Go to Flag 4. Check MOT11-000. Refer to: • 311F-120 1K LCSS PWB Damage RAP. • GP 10, How to Check a Motor. • P/J17, 1K LCSS PWB. • 311C-120 1K LCSS Power Distribution RAP. Install new components as necessary: • Transport motor 1, PL 11.110 Item 2. • 1K LCSS PWB, PL 11.124 Item 1. Perform SCP 5 Final Actions.

• Code: 311-130-00-150, 311-132-00-150
• Description: LVF BM Paper Exiting to Bin 0 RAP 311-130-00-150 The leading edge of the sheet is late to the top exit sensor. 311-132-100-150 The trailing edge of the sheet is late from the top exit sensor.
• Remedy: NOTE: All LVF BM interlocks must be made to supply +24V to the motors. Enter dC330, code 011-001 to run transport motor 2, MOT11-001. The motor runs. Y↓N→Go to Flag 3. Check MOT11-001. Refer to: • GP 10, How to Check a Motor. • P/J309, LVF PWB. • 311D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Transport motor 2, PL 11.70 Item 5. • LVF PWB, PL 11.90 Item 8. Enter dC330, code 011-002 to energize the diverter gate solenoid, S11-002. The diverter gate solenoid energizes. Y↓N→Go to Flag 2. Check SOL11-002. Refer to: • GP 12, How to Check a Solenoid. • P/J306, LVF PWB. • 311D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Bin 0/bin 1 diverter gate solenoid, PL 11.70 Item 12. • LVF PWB, PL 11.90 Item 8. Enter dC330, code 011-130, actuate the top exit sensor, Q11-130. The display changes. Y↓N→Go to Flag 1. Check Q11-130. Refer to: • GP 11, How to Check a Sensor. • P/J314, LVF PWB. • 311D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Top exit sensor, PL 11.70 Item 11. • LVF PWB, PL 11.90 Item 8. Enter dC330, code 011-000 to energize the transport motor 1, MOT11-000. The motor energizes. Y↓N→Go to Flag 4. Check MOT11-000. Refer to: • GP 10, How to Check a Motor. • P/J305, LVF PWB. • 311D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Transport motor 1, PL 11.62 Item 2. • LVF PWB, PL 11.90 Item 8. Perform SCP 5 Final Actions.

• Code: 311-130-00-171, 311-132-00-171
• Description: HVF Top Exit Sensor RAP 311-130-00-171 The paper leading edge is late arriving at the top exit sensor. 311-132-00-171 The paper trailing edge is late leaving the top exit sensor.
• Remedy: Enter dC330 code 011-130. Manually operate the top exit sensor, Q11-130. The display changes. Y↓N→Go to Flag 1. Check Q11-130. Refer to: • GP 11 How to Check a Sensor. • P/J101, HVF Control PWB • 311A-171 HVF Power Distribution RAP Install new components as necessary: • Top exit sensor, PL 11.156 Item 3. • HVF control PWB, PL 11.157 Item 2 Enter dC330 code 011-002. Energize the exit diverter solenoid, SOL 11-002. SOL11-002 energizes. Y↓N→Go to Flag 2. Check SOL 11-002. Refer to: • GP 12, How to Check a Solenoid or Clutch. • P/J102, HVF Control PWB • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Exit diverter solenoid, PL 11.150 Item 4. • HVF control PWB, PL 11.157 Item 2 Enter dC330 code 011-001 to run the transport motor 2, MOT11-001. MOT11-001 runs. Y↓N→Go to Flag 3. Check MOT11-001. Refer to: • GP 10 How to Check a Motor. • P/J102, HVF Control PWB • 311A-171 HVF Power Distribution RAP Install new components as necessary: • Transport motor 2, PL 11.150 Item 1. • HVF control PWB, PL 11.157 Item 2. Check the drive belt on the motor. The drive belt is good. Y↓N→Install a new drive belt, PL 11.150 Item 7. The fault may be intermittent, check for damaged wiring or bad connectors. If necessary install new components: • Top exit sensor, PL 11.156 Item 3. • Exit diverter solenoid, PL 11.150 Item 4. • Diverter gate, PL 11.153 Item 9. • Transport motor 2, PL 11.150 Item 1. • HVF control PWB, PL 11.157 Item 2.

• Code: 311-140-00-110, 311-142-00-110
• Description: Sheet Late to Bin 1 RAP 311-140-00-110 The leading edge of the sheet is late to the 2nd to top exit sensor, Q11-140. 311-142-00-110 The trailing edge of the sheet is late to the 2nd to top exit sensor, Q11-140.
• Remedy: NOTE: All 2K LCSS interlocks must be made to supply +24V to the motors.. Enter dC330 code 011-001 to energize the transport motor 2, MOT11-001. MOT11- 110 runs. Y↓N→Go to Flag 3. Check MOT11-001. Refer to: • 311G-110 2K LCSS PWB Damage RAP. • GP 10, How to check a motor. • P/J309, 2K LCSS PWB. • 311D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Transport motor 2, PL 11.22 Item 5. • 2K LCSS PWB, PL 11.26 Item 1. Enter dC330 code 011-002 to energize the diverter solenoid, SOL11-002. The diverter solenoid energizes. Y↓N→Go to Flag 4. Check SOL11-002. Refer to: • 311G-110 2K LCSS PWB Damage RAP. • GP 12, How to Check a Solenoid or Clutch. • P/J306, 2K LCSS PWB. • 311D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Diverter gate solenoid, PL 11.22 Item 12. • 2K LCSS PWB, PL 11.26 Item 1.. Enter dC330 code 011-140, actuate the 2nd to top exit sensor, Q11-140. The display changes. Y↓N→Go to Flag 1. Check Q11-140. Refer to: • 311G-110 2K LCSS PWB Damage RAP. • GP 11, How to Check a sensor. • P/J313, 2K LCSS PWB. • 311D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • 2nd to top exit sensor, PL 11.23 Item 4. • 2K LCSS PWB, PL 11.26 Item 1. Enter dC330 code 011-000 to energize the transport motor 1, MOT11-000. MOT11-000 runs. Y↓N→Go to Flag 2. Check MOT11-000. Refer to: • 311G-110 2K LCSS PWB Damage RAP. • GP 10, How to Check a Motor. • P/J305, 2K LCSS PWB. • 311D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Transport motor 1, PL 11.14 Item 2. • 2K LCSS PWB, PL 11.26 Item 1. If the fault is still present, perform the 311-319-00-110 Rear Tamper Move Failure RAP. NOTE: A software problem can cause the machine to incorrectly display the fault code 11-142- 110.

• Code: 311-140-00-120, 311-142-00-120
• Description: Sheet Late to Bin 1 RAP 311-140-00-120 The leading edge of the sheet is late to the 2nd to top exit sensor. 311-142-00-120 The trailing edge of the sheet is late to the 2nd to top exit sensor.
• Remedy: NOTE: All 1K LCSS interlocks must be made to supply +24V to the motors.. Enter dC330 code 011-001 transport motor 2, MOT11-001 MOT11-001 runs. Y↓N→Go to Flag 3. Check MOT11-001. Refer to: • 311F-120 1K LCSS PWB Damage RAP. • GP 10, How to check a motor. • P/J16, 1K LCSS PWB. • 311C-120 1K LCSS Power Distribution RAP. Install new components as necessary: • Transport motor 2, PL 11.118 Item 5. • 1K LCSS PWB, PL 11.124 Item 1. Enter dC330 code 011-002 diverter solenoid, SOL11-002 SOL11-002 energizes. Y↓N→Go to Flag 4. Check SOL11-002. Refer to: • 311F-120 1K LCSS PWB Damage RAP. • GP 12, How to Check a Solenoid. • P/J13, 1K LCSS PWB • 311C-120 1K LCSS Power Distribution RAP. Install new components as necessary: • Diverter gate solenoid, PL 11.22 Item 12. • 1K LCSS PWB, PL 11.26 Item 1. Enter dC330 code 011-140 2nd to top exit sensor, Q11-140. Actuate Q11-140 The display changes. Y↓N→Go to Flag 1. Check Q11-140. Refer to: • 311F-120 1K LCSS PWB Damage RAP. • GP 11, How to Check a sensor. • P/J2, 1K LCSS PWB • 311C-120 1K LCSS Power Distribution RAP. Install new components as necessary: • 2nd to top exit sensor, PL 11.120 Item 4. • 1K LCSS PWB, PL 11.124 Item 1. Enter dC330 code 011-000 transport motor 1, MOT11-000 MOT11-000 runs. Y↓N→Go to Flag 2. Check MOT11-000. Refer to: • 311F-120 1K LCSS PWB Damage RAP. • GP 10, How to Check a Motor. • P/J17, 1K LCSS PWB. • 311C-120 1K LCSS Power Distribution RAP. Install new components as necessary: • Transport motor 1, PL 11.110 Item 2. • 1K LCSS PWB, PL 11.124 Item 1. Perform SCP 5 Final Actions.

• Code: 311-140-00-150, 311-142-00-150
• Description: LVF BM Sheet Late to Bin 1 RAP 11-140-00-150 The leading edge of the sheet is late to the 2nd to top exit sensor, Q11-140. 311-142-00-150 The trailing edge of the sheet is late to the 2nd to top exit sensor, Q11-140.
• Remedy: NOTE: All LVF BM interlocks must be made to supply +24V to the motors.. Enter dC330, code 011-001 to energize the transport motor 2, MOT11-001. The motor energizes. Y↓N→Go to Flag 3. Check MOT11-001. Refer to: • GP 10, How to check a motor. • P/J309, LVF PWB. • 311D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Transport motor 2, PL 11.70 Item 5. • LVF PWB, PL 11.90 Item 8. Enter dC330, code 011-002 to energize the diverter solenoid, S11-002. Energize the solenoid. The diverter solenoid energizes. Y↓N→Go to Flag 4. Check SOL11-002. Refer to: • GP 12, How to Check a Solenoid or Clutch. • P/J306, LVF PWB. • 311D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Diverter gate solenoid, PL 11.22 Item 12. • LVF PWB, PL 11.90 Item 8.. Enter dC330, code 011-140, actuate the 2nd to top exit sensor, Q11-140. The display changes. Y↓N→Go to Flag 1. Check Q11-140. Refer to: • GP 11, How to Check a sensor. • P/J314, LVF PWB. • 311D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • 2nd to top exit sensor, PL 11.23 Item 4. • LVF PWB, PL 11.90 Item 8. Enter dC330, code 011-000 to energize the transport motor 1, MOT11-000. The motor energizes. Y↓N→Go to Flag 2. Check MOT11-000. Refer to: • GP 10, How to Check a Motor. • P/J305, LVF PWB. • 311D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Transport motor 1, PL 11.62 Item 2. • LVF PWB, PL 11.90 Item 8. If the fault is still present, perform 311-319-00-150 Rear Tamper Move Failure RAP.

• Code: 311-140-00-171, 311-142-00-171
• Description: HVF 2nd to Top Exit Sensor RAP 311-140-00-171 The paper leading edge is late arriving at the 2nd to top exit sensor. 311-142-00-171 The paper trailing edge is late leaving the 2nd to top exit sensor.
• Remedy: Enter dC330 code 011-140. Manually activate the 2nd to top exit sensor, Q11-140. The display changes. Y↓N→Go to Flag 1. Check Q11-140. Refer to: • GP 11 How to Check a Sensor. • P/J101, HVF Control PWB • 311A-171 HVF Power Distribution RAP Install new components as necessary: • 2nd to top exit sensor, PL 11.156 Item 2. • HVF control PWB, PL 11.157 Item 2 Enter dC330 code 011-002. Energize the exit diverter solenoid SOL11-002. SOL11-002 energizes. Y↓N→Go to Flag 2. Check SOL11-002. Refer to: • GP 12, How to Check a Solenoid or Clutch. • P/J102, HVF Control PWB • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Exit diverter solenoid, PL 11.150 Item 4. • HVF control PWB, PL 11.157 Item 2 Enter dC330 code 011-001 to run the transport motor 2, MOT11-001. MOT11-001 runs. Y↓N→Go to Flag 3. Check MOT11-001. Refer to: • GP 10 How to Check a Motor. • P/J102, HVF Control PWB • 311A-171 HVF Power Distribution RAP Install new components as necessary: • Transport motor 2, PL 11.150 Item 1. • HVF control PWB, PL 11.157 Item 2 Check the drive belt on the motor. The drive belt is good. Y↓N→Install a new drive belt, PL 11.150 Item 10. The fault may be intermittent, check for damaged wiring or bad connectors. If necessary install new components: • 2nd to top exit sensor, PL 11.156 Item 2. • Exit diverter solenoid, PL 11.150 Item 4. • Diverter gate, PL 11.153 Item 9. • Transport motor 2, PL 11.150 Item 1. • HVF control PWB, PL 11.157 Item 2. • Check if the HVF module has the W/TAG V-006 modifications installed. If the modifications have not been installed perform ADJ 11.13-171 HVF Performance Improvements W/ TAG V-006.