Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Xerox WorkCentre 5890 — Trang 12/28

Code: 311-300-00-120, 311-302-00-120, 311-303-00-120

Description: Interlocks RAP 311-300-00-120 The docking interlock is open during run mode. 311-302-00-120 The top cover interlock is open during run mode. 311-303-00-120 The front door interlock is open during run mode.
Remedy: Go to Flag 1. Check for +24V on pin 1. If the voltage is not present, refer to 311C-120 1K LCSS Power Distribution RAP. Go to the appropriate procedure: • 311-300-00-120 Docking Interlock Checkout • 311-302-00-120 Top Cover Interlock Checkout • 311-303-00-120 Front Door Interlock Checkout 311-300-00-120 Docking Interlock Checkout Undock the 1K LCSS, refer to-120., check the docking interlock switch, S11-300 as follows: • While supporting the 1K LCSS, slide the 1K LCSS 5cm (2 inches) away from the machine. Check the interlock actuator on the machine is not damaged or missing. NOTE: The wiring harness passes underneath the docking interlock switch housing. If this harness is not correctly positioned, the switch can be mis-located, giving intermittent docking interlock problems. • Enter dC330 code 011-300, docking interlock switch, S11-300. While supporting the 1K LCSS, slide the 1K LCSS 5cm (2 inches) away from the machine to de-actuate S11-300. If the display does not change, refer to: – GP 13, How to Check a Switch – P/J6, 1K LCSS PWB • Go to Flag 1. Check the wiring between P/J5 and S11-300. • If necessary, install a new docking interlock switch, PL 11.102 Item 2. 311-302-00-120 Top Cover Interlock Checkout Check the top cover interlock switch, S11-302 as follows: • Check the switch actuator. • Enter dC330 code 011-302, top cover interlock switch, S11-302. Actuate S11-302. If the display does not change, refer to: – GP 13, How to Check a switch –. – P/J5, 1K LCSS PWB • Go to Flag 3. Check the wiring between P/J6 and S11-302. • If necessary, install a new top cover interlock switch, PL 11.124 Item 6. 311-303-00-120 Front Door Interlock Checkout Check the front door interlock switch, S11-303 as follows: • Check the switch actuator. • Enter dC330 code 011-303, front door interlock switch, S11-303. Actuate S11-303. If the display does not change, refer to: – GP 13, How to Check a switch –. – P/J5, 1K LCSS PWB • Go to Flag 2. Check the wiring between P/J5 and S11-303. • If necessary, install a new front door interlock switch, PL 11.124 Item 5. Perform SCP 5 Final Actions.

Code: 311-300-00-150, 311-302-00-150, 311-303-00-150

Description: Interlocks RAP 311-300-00-150 The docking interlock is open during run mode. 311-302-00-150 The top cover interlock is open during run mode. 311-303-00-150 The front door interlock is open during run mode.
Remedy: Go to Flag 1. Check for +24V on P/J302 pin 1. If the voltage is not present, refer to 311D-110 LVF BM Power Distribution RAP. Go to the appropriate RAP: • 311-300-00-150 Docking Interlock RAP • 311-302-00-150 Top Cover Interlock RAP • 311-303-00-150 Front Door Interlock RAP 311-300-00-150 Docking Interlock RAP Un-dock the LVF BM-150, Check the docking interlock switch, S11-300 as follows: • Check the interlock actuator on the machine is not damaged or missing. • Enter dC330, code 011-300. Actuate the switch, if the display does not change, refer to: – GP 13, How to Check a Switch –. – P/J302, LVF PWB. • Go to Flag 1. Check the wiring between P/J302 and the switch. • If necessary, install a new switch, PL 11.52 Item 2. 311-302-00-150 Top Cover Interlock RAP Check the top cover interlock switch, S11-302 as follows: • Check the switch actuator. • Enter dC330, code 011-302. Actuate the switch, if the display does not change, refer to: – GP 13, How to Check a switch –. – P/J315, LVF PWB. • Go to Flag 3. Check the wiring between P/J315 and the switch. • If necessary, install a new switch, PL 11.76 Item 6. 311-303-00-150 Front Door Interlock RAP Check the front door interlock switch, S11-303 as follows: • Check the switch actuator. • Enter dC330, code 011-303. actuate the switch, if the display does not change, refer to: – GP 13, How to Check a switch –. – P/J302, LVF PWB. • Go to Flag 2. Check the wiring between P/J302 and the switch. • If necessary, install a new switch, PL 11.76 Item 5. Perform SCP 5 Final Actions.

Code: 311-300-00-171, 311-302-00-171, 311-303-00-171

Description: HVF Docking and Interlock RAP 311-300-00-171 The finisher was detected to be undocked in the run mode. 311-302-00-171 The top cover interlock was detected open during a run. 311-303-00-171 The finisher front door interlock was detected open during a run.
Remedy: Go to the appropriate procedure: • 311-300-00-171 Docking Interlock Checkout • 311-302-00-171 Top Cover Interlock Checkout • 311-303-00-171 Front Door Interlock Checkout 311-300-00-171 Docking Interlock Checkout Check the docking interlock switch, S11-300. • Check the switch actuator mounted on the machine is correctly installed and un-broken. • Enter dC330 code 011-300, actuate the switch and check the display. Refer to: – GP 13 How to Check a Switch. – P/J112, HVF Control PWB –, Flag 3. • Check the wiring, GP 7. • If necessary, install new components: – Docking interlock switch, PL 11.130 Item 16. 311-302-00-171 Top Cover Interlock Checkout Check the top cover interlock switch, S11-302. • Check the switch actuator is not damaged. • Enter dC330 code 011-302 actuate the switch and check the display. Refer to: – GP 13 How to Check a Switch. – P/J112, HVF Control PWB. –, Flag 1. • Check the wiring, GP 7. • If necessary, install a new top cover interlock switch, PL 11.145 Item 24. . 311-303-00-171 Front Door Interlock Checkout Check the front door interlock switch, S11-303. • Check the switch actuator on the inside of the front door is not damaged. • Enter dC330 code 011-303 actuate the switch and check the display. Refer to: – GP 13 How to Check a Switch. – P/J112, HVF Control PWB. –, Flag 2. • Check the wiring, GP 7. • If necessary, install a new front door interlock switch, PL 11.145 Item 29.

Code: 311-306-00-171, 311-309-00-171

Description: HVF Inserter Interlock RAP 311-306-00-171 The inserter top cover interlock was detected open in the run mode. 11-309-00-171 The inserter left hand door was detected open in the run mode.
Remedy: Enter dC330 code 011-306. Open and close the top cover to actuate the switch. The display changes Y↓N→Refer to: • GP 13 How to Check a Switch. •, Flag 1 and Flag 2. • P/J1, P/J5, P/J4, Inserter PWB. • P/J701, P/J703, HVF Control PWB. • Check the wiring, GP 7. If necessary install new components: • Inserter top cover interlock switch, PL 11.177 Item 8. • Inserter PWB, PL 11.179 Item 9. • HVF Control PWB, PL 11.157 Item 2. Open the top cover. Enter dC330 code 011-431, open and close the left hand door to actuate the switch. The display changes. Y↓N→Refer to: • GP 13 How to Check a Switch. •, Flag 3 and Flag 4. • P/J2, P/J4, Inserter PWB. • P/J701, HVF Control PWB • Check the wiring, GP 7. If necessary install new components: • Inserter left door interlock switch, PL 11.175 Item 18. • Inserter PWB, PL 11.179 Item 9. • HVF Control PWB, PL 11.157 Item 2. The fault may be intermittent. Check the wiring and the routing of the harness. Refer to GP 7.

Code: 311-307-00-171, 311-308-00-171

Description: Tri-folder Interlock RAP 311-307-00-171 The Tri-folder top cover interlock was detected open during a run. 311-308-00-171 The Tri-folder front door interlock was detected open during a run.
Remedy: Check that the yellow, +24V interlock LED on the BM PWB is lit. The LED is lit. Y↓N→Go to Flag 1, Flag 2 and Flag 3. Check the wiring and repair as necessary. Check the TF top cover interlock switch and the TF front door interlock switch, S11-393. Refer to: • GP 13 How to Check a Switch. • P/J601, Tri Folder Control PWB. • P/J553, BM PWB. • P/J559, BM PWB. • P/J131, HVF Control PWB. • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Top cover interlock switch, PL 11.197 Item 3. • Front door interlock switch, PL 11.197 Item 2. • Tri-folder control PWB, PL 11.193 Item 16. • BM PWB, PL 11.166 Item 10. • HVF control PWB, PL 11.157 Item 2. Enter dC330 code 011-393. Open the tri-folder front door. The display changes. Y↓N→Go to Flag 4 and Flag 5. Check the wiring and repair as necessary. Check the tri-folder front door interlock, S11-393. Refer to: • GP 13 How to Check a Switch. • P/J605, P/J602, Tri Folder Control PWB. • P/J563, BM PWB. • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Tri-folder front door interlock switch, PL 11.197 Item 3. • Tri-folder control PWB, PL 11.193 Item 16. • BM PWB, PL 11.166 Item 10. Enter dC330 code 011-394. Open the tri-folder top cover door assembly. The display changes. Y↓N→Go to Flag 6 and Flag 7. Check the wiring and repair as necessary. Check the Tri-folder top cover interlock sensor, Q11-394. Refer to: • GP 11 How to Check a Sensor. • P/J605, P/J602, Tri Folder Control PWB. • P/J563, BM PWB. • 311A-171 HVF Power Distribution RAP. Install new components as necessary: • Top cover interlock sensor, Q11-394, PL 11.190 Item 10. • Tri-folder control PWB, PL 11.193 Item 16. • BM PWB, PL 11.166 Item 10. Perform SCP 5 Final Actions.

Code: 311-319-00-110

Description: Rear Tamper Move Failure RAP 311-319-00-110 The rear tamper away home sensor has failed. NOTE: The away home position is with the rear tamper approximately halfway along it’s travel.
Remedy: NOTE: All 2K LCSS interlocks must be made to supply +24V to the motors. Enter dC330, codes 11-004 and 11-006 alternately. The rear tamper moves between the home and inboard positions. Y↓N→Go to Flag 3. Check the rear tamper motor, MOT11-004. Refer to: • 311G-110 2K LCSS PWB Damage RAP. • GP 10, How to Check a Motor. • P/J312, 2K LCSS PWB. • 311D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Tamper assembly, PL 11.16 Item 1. • 2K LCSS PWB, PL 11.26 Item 1. Enter dC330 code 011-311, actuate the rear tamper home sensor, Q11-311. The display changes. Y↓N→Go to Flag 1. Check Q11-311. Refer to: • 311G-110 2K LCSS PWB Damage RAP. • GP 11, How to Check a Sensor. • P/J312, 2K LCSS PWB. • 311D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Rear tamper home sensor, PL 11.16 Item 3. • 2K LCSS PWB, PL 11.26 Item 1. NOTE: The away home position is used for short edge feed small paper. This saves unnecessary rear tamper travel. Enter dC330 code 011-319. Actuate the rear tamper away home sensor, Q11-319. The display changes. Y↓N→Go to Flag 2. Check Q11-319. Refer to: • 311G-110 2K LCSS PWB Damage RAP. • GP 11, How to Check a Sensor. • P/J312, 2K LCSS PWB. • 311D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Rear tamper away home sensor, PL 11.16 Item 3. • 2K LCSS PWB, PL 11.26 Item 1. Perform SCP 5 Final Actions.

Code: 311-319-00-120

Description: Rear Tamper Move Failure RAP 311-319-00-120 The rear tamper away home sensor has failed. NOTE: The away home position is with the rear tamper approximately halfway along it’s travel.
Remedy: NOTE: All 1K LCSS interlocks must be made to supply +24V to the motors. Enter dC330 codes 11-004 and 11-006 alternately. The rear tamper moves between the home and inboard positions. Y↓N→Go to Flag 3. Check the rear tamper motor, MOT11-004. Refer to: • 311F-120 1K LCSS PWB Damage RAP. • GP 10, How to Check a Motor. • P/J9, 1K LCSS PWB. • 311C-120 1K LCSS Power Distribution RAP. Install new components as necessary: • Tamper assembly, PL 11.112 Item 1. • 1K LCSS PWB, PL 11.124 Item 1. Enter dC330 code 011-311. Actuate the rear tamper home sensor, Q11-311. The display changes. Y↓N→Go to Flag 1. Check Q11-311. Refer to: • 311F-120 1K LCSS PWB Damage RAP. • GP 11, How to Check a Sensor. • P/J16, 1K LCSS PWB • 311C-120 1K LCSS Power Distribution RAP. Install new components as necessary: • Rear tamper home sensor, PL 11.112 Item 3. • 1K LCSS PWB, PL 11.124 Item 1. NOTE: The away home position is used for short edge feed small paper. This saves unnecessary rear tamper travel. Enter dC330 code 011-319. Actuate the rear tamper away home sensor, Q11-319. The display changes. Y↓N→Go to Flag 2. Check Q11-319. Refer to: • 311F-120 1K LCSS PWB Damage RAP. • GP 11, How to Check a Sensor. • P/J16, 1K LCSS PWB • 311C-120 1K LCSS Power Distribution RAP. Install new components as necessary: • Rear tamper away home sensor, PL 11.112 Item 3. • 1K LCSS PWB, PL 11.124 Item 1. Perform SCP 5 Final Actions.

Code: 311-319-00-150

Description: LVF BM Rear Tamper Move Failure RAP 311-319-00-150 The rear tamper away home sensor has failed. NOTE: The away home position is with the rear tamper approximately halfway along it’s travel.
Remedy: NOTE: All LVF BM interlocks must be made to supply +24V to the motors. Enter dC330, codes 11-004 and 11-006 alternately. The rear tamper moves between the home and inboard positions. Y↓N→Go to Flag 3. Check the rear tamper motor, MOT11-004. Refer to: • GP 10, How to Check a Motor. • P/J312, LVF PWB. • 311D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Tamper assembly, PL 11.64 Item 1. • LVF PWB, PL 11.90 Item 8. Enter dC330 code 011-311, actuate the rear tamper home sensor Q11-311. The display changes. Y↓N→Go to Flag 1 and check Q11-311. Refer to: • GP 11, How to Check a Sensor. • P/J312, LVF PWB. • 311D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Rear tamper home sensor, PL 11.64 Item 3. • LVF PWB, PL 11.90 Item 8. NOTE: The away position is used for short edge feed small paper. This saves unnecessary rear tamper travel. Enter dC330, code 011-319, actuate the rear tamper away sensor Q11-319. The display changes. Y↓N→Go to Flag 2 and check Q11-319. Refer to: • GP 11, How to Check a Sensor. • P/J312, LVF PWB. • 311D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Rear tamper away sensor, PL 11.64 Item 3. • LVF PWB, PL 11.90 Item 8. Perform SCP 5 Final Actions.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie