• Code: 01
• Display: ERROR CONDITION RIBBON OUT
• Description: Print engine stops; RIBBON light ON, ERROR light flashes.
• Causes: In thermal transfer mode, ribbon is not loaded or incorrectly loaded. In thermal transfer mode, the ribbon sensor is not detecting ribbon that is loaded incorrectly. In thermal transfer mode, media is blocking the ribbon sensor.

• Code: 02
• Display: WARNING RIBBON IN
• Description: RIBBON light ON, ERROR light flashes.
• Causes: Ribbon is loaded, but the print engine is set for direct thermal mode.

• Code: 03
• Display: ERROR CONDITION PAPER OUT
• Description: Print engine stops; MEDIA light ON, ERROR light flashes.
• Causes: Media is not loaded or is loaded incorrectly. Misadjusted media sensor. The print engine is set for noncontinuous media, but continuous media is loaded.

• Code: 04
• Display: ERROR CONDITION HEAD OPEN
• Description: Print engine stops and ERROR light flashes.
• Causes: The head open sensor is not working properly.

• Code: 05
• Display: WARNING HEAD TOO HOT
• Description: Print engine stops and ERROR light flashes.
• Causes: The printhead is over temperature. Caution • The printhead may be hot enough to cause severe burns. Allow the printhead to cool. Caution • Observe proper electrostatic safety precautions when handling any static-sensitive components such as circuit boards and printheads.

• Code: 06
• Display: WARNING HEAD COLD
• Description: Print engine stops and ERROR light flashes.
• Causes: The printhead is under temperature. The printhead data cable is not properly connected.

• Code: 07
• Display: OUT OF MEMORY CREATING BITMAP
• Description:
• Causes: Creating Bitmap The bitmap size (label length/width) does not fit in available memory.

• Code: 08
• Display: OUT OF MEMORY STORING BITMAP
• Description:
• Causes: Storing Bitmap Not enough memory is available to store the bitmap created.