Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C9075 Pro — Trang 4/67

Code: E004-0301

Description: IH overcurrent detection error. Detected an overcurrent on IH power supply board.
Remedy: 1. Faulty fixing belt unit -> replace the fixing belt unit 2. Faulty fixing IH unit -> replace the fixing IH unit 3. Faulty IH power PCB -> replace the IH power PCB

Code: E004-0401

Description: 12V failure error. Detected abnormality on the 12V power supply line.
Remedy: 1. Check the fixing belt -> if it is damaged, replace the fixing belt unit 2. Check the connection of the fixing fuse PCB -> replace the fuse PCB 3. Check the connection of the fixing thermoswitch (TP2) (thermoswitch is OFF, or the cable is disconnected) -> replace the fixing belt unit 4. Relay PCB replacement 5. DC controller replacement 6. IH power supply replacement

Code: E004-0501

Description: Fixing belt temperature difference error 1. Difference of detected temperature between the fixing subthermistor -2 (THM1-3) and the fixing subthermistor -1 (THM1-2) is bigger than the rated value.
Remedy: 1. Fixing main /sub thermistor (THM1-1/2/3) connector disconnetion (pinching wire, broken wire) -> replace the fixing belt unit 2. Check the rotation of the fixing motor (to see if the connector is physically removed or disconnected) -> replace the fixing motor or the harness 3. Faulty drawer connector -> clean the drawer connector or replace the fixing unit 4. Replace the DC controller PCB

Code: E004-0501

Description: Fixing main thermistor, a connection error (circuit failure) of fixing subthermistor 1/2. Connection sensing signal of fixing main thermistor and sub thermistor 1/2 is not detected
Remedy: 1. Check the connection of the connector on the fixing belt unit -> if it is disconnected, replace it 2. Faulty drawer connector -> clean the drawer or replace the fixing unit

Code: E004-0502

Description: Fixing belt temperature difference error 2. Difference of detected temperature between the fixing main thermistor (THM1-1) and the fixing subthermistor 1 (THM1-2) are bigger than the rated value.
Remedy: 1. Fixing main /sub thermistor (THM1-1/2/3) connector disconnetion (pinching wire, broken wire) -> replace the fixing belt unit 2. Check the rotation of the fixing motor (to see if the connector is physically removed or disconnected) -> replace the fixing motor or the harness 3. Faulty drawer connector -> clean the drawer connector or replace the fixing unit 4. Replace the DC controller PCB

Code: E004-0502

Description: 1. Check the connection of the connector on the pressure thermistor -> if it is disconnected, replace the pressure stay 2. Faulty drawer connector -> clean the drawer or replace the fixing unit. sub thermistor 1/2 connection sensing signal is not detected
Remedy: 1. Check the connection of the connector on the pressure thermistor -> if it is disconnected, replace the pressure stay 2. Faulty drawer connector -> clean the drawer or replace the fixing unit

Code: E004-0503

Description: Fixing belt temperature difference error 3. Difference of detected temperature between the fixing main thermistor (THM1-1) and the fixing subthermistor 2 (THM1-3) are bigger than the rated value
Remedy: 1. Fixing main /sub thermistor (THM1-1/2/3) connector disconnetion (pinching wire, broken wire) -> replace the fixing belt unit 2. Check the rotation of the fixing motor (to see if the connector is physically removed or disconnected) -> replace the fixing motor or the harness 3. Faulty drawer connector -> clean the drawer connector or replace the fixing unit 4. Replace the DC controller PCB

Code: E004-0504

Description: Pressure belt temperature difference error. Difference of detected temperature between pressure subthermistor 2 (THM1-3) and pressure subthermistor 1 (THM1-2) is bigger than the rated value.
Remedy: 1. The connectors of the pressure sub thermistor (THM3,4) are physically removed (the cable is caught, or disconnected) -> replace the thermistor or the presure stay 2. Soiled, improper location of, or faulty pressure sub thermistor (THM3,4) -> clean the thermistor or replace it 3. Faulty drawer connector is a possible cause -> clean the drawer connector or replace the fixing unit 4. Replace the DC controller PCB
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie