• Code: E5AA-8003
• Description: Cutter motor clock error(Finisher-A1). The cutter motor clock sensor does not detect the motor clock when the cutter motor has been driven for 625msec
• Remedy: 1. The connector of the cutter motor clock sensor (S108) or the cutter motor (M106) are disconnected. 2. The wiring of the cutter motor clock sensor (S108) or the cutter motor (M106) are faulty. 3. The cutter motor clock sensor (S108) is faulty. 4. The cutter motor (M106) is faulty. 5. The trimmer controller PCB (PCB1) is faulty.

• Code: E5AE-8000
• Description: Trimmer stationary paper error. The inlet sensor detects the stationary paper after performing the paper delivery operation.
• Remedy: 1. The paper has jammed in the trimmer. 2. The connector of the inlet sensor (S101) is disconnected. 3. The wire of the inlet sensor (S101) is faulty. 4. The inlet sensor (S101) is faulty. 5. The trimmer controller PCB (PCB1) is faulty.

• Code: E5BA-8001
• Description: Error in the front estrangement motor(Finisher-A1). The front estrangement motor HP sensor does not turn ON when the front estrangement motor has been driven for 191msec.
• Remedy: 1. The connector of the front estrangement motor HP sensor (S102) or the front estrangement motor (M103) are disconnected. 2. The wiring of the front estrangement motor HP sensor (S102) or the front estrangement motor (M103) are faulty. 3. The front estrangement motor HP sensor (S102) is faulty. 4. The front estrangement motor (M103) is faulty. 5. The trimmer controller PCB (PCB1) is faulty.

• Code: E5BA-8002
• Description: Error in the front estrangement motor(Finisher-A1). The front estrangement motor HP sensor does not turn OFF when the front estrangement motor has been driven for 724msec. after the front estrangement motor HP sensor has turned ON.
• Remedy: 1. The connector of the front estrangement motor HP sensor (S102) or the front estrangement motor (M103) are disconnected. 2. The wiring of the front estrangement motor HP sensor (S102) or the front estrangement motor (M103) are faulty. 3. The front estrangement motor HP sensor (S102) is faulty. 4. The front estrangement motor (M103) is faulty. 5. The trimmer controller PCB (PCB1) is faulty.

• Code: E5BA-8011
• Description: Error in the rear estrangement motor(Finisher-A1). The rear estrangement motor HP sensor does not turn ON when the rear estrangement motor has been driven for 180msec.
• Remedy: 1. The connector of the rear estrangement motor HP sensor (S104) or the rear estrangement motor (M104) are disconnected. 2. The wiring of the rear estrangement motor HP sensor (S104) or the rear estrangement motor (M104) are faulty. 3. The rear estrangement motor HP sensor (S104) is faulty. 4. The rear estrangement motor (M104) is faulty. 5. The trimmer controller PCB (PCB1) is faulty.

• Code: E5BA-8012
• Description: Error in the rear estrangement motor(Finisher-A1). The rear estrangement motor HP sensor does not turn OFF when the rear estrangement motor has been driven for 537msec.
• Remedy: 1. The connector of the rear estrangement motor HP sensor (S104) or the rear estrangement motor (M104) are disconnected. 2. The wiring of the rear estrangement motor HP sensor (S104) or the rear estrangement motor (M104) are faulty. 3. The rear estrangement motor HP sensor (S104) is faulty. 4. The rear estrangement motor (M104) is faulty. 5. The trimmer controller PCB (PCB1) is faulty.

• Code: E5BB-8001
• Description: Error in the waste paper full sensor. The A/D input value does not enter into the D/A output upper limit of the waste paper full sensor.
• Remedy: 1. The connector of the waste paper full sensor (emitting/ receiving) (S011) is disconnected. 2. The wire of the waste paper full sensor (emitting/ receiving) (S011) is faulty. 3. The waste paper full sensor (emitting/receiving) (S011) is faulty. 4. The trimmer controller PCB (PCB1) is faulty.

• Code: E5BB-8002
• Description: Error in the waste paper full sensor(Finisher-A1). The A/D input value does not enter into the D/A output lower limit of the waste paper full sensor.
• Remedy: 1. The connector of the waste paper full sensor (emitting/ receiving) (S011) is disconnected. 2. The wire of the waste paper full sensor (emitting/ receiving) (S011) is faulty. 3. The waste paper full sensor (emitting/receiving) (S011) is faulty. 4. The trimmer controller PCB (PCB1) is faulty.