• Code: E403
• Description: • The feed motor (M2) fails to rotate. • The feed motor clock sensor (S9) is faulty.
  • The number of belt motor clock pulses is below a specific value for 200 msec.
• Remedy: Perfrom the work according to the instructions in the service manual of the feeder.

• Code: E404
• Description: • The delivery motor (M5) fails to rotate. • The delivery motor clock sensor (S13) is faulty.
  • The number of delivery motor clock puleses within 200 msec is below a specific value.
• Remedy: Perfrom the work according to the instructions in the service manual of the feeder.

• Code: E421
• Description: Communication with the ADF is faulty
  •The communication with the ADF remains interrupted for 5 sec or more.
• Remedy: Perfrom the work according to the instructions in the service manual of the feeder.

• Code: E500
• Description: Finisher Data communication
  • The communication between the machine and the finisher is interrupted. This error is detected by the machine.
• Remedy:

• Code: E503-03
• Description: Communication error
  • The communication with the saddle stitcher is interrupted.
• Remedy:

• Code: E504-01
• Description: Height sensor (PS1)
  • The communication between the height sensor and the finisher controller PCB fails. Or, an error exists in the communication data.
• Remedy:

• Code: E504-02
• Description: Height sensor (PS1)
  • The communication between the sensor and the finisher controller PCB fails for a specific period of time or more.
• Remedy:

• Code: E504-03
• Description: Height sensor (PS1)
  • The connector is found to be disconnected at poweron.
• Remedy: