• Code: E504-04
• Description: Height sensor (PS1)
  • An error occurs when the sensor is adjusted using the DIP switch.
• Remedy:

• Code: E505-01
• Description: Back-up RAM
  • An error exits in the check sum at power-on.
• Remedy:

• Code: E512-01
• Description: • Delivery motor (M2) • Delivery motor clock sensor (PI10)
  • The delivery motor clock sensor does not send the target number of clock pulses at the start of operation.
• Remedy:

• Code: E512-02
• Description: • Delivery motor (M2) • Delivery motor clock sensor (PI10)
  • The clock pulses sent while paper is being moved fall short of an equivalent of 200 mm in length.
• Remedy:

• Code: E513-01
• Description: • Alignment motor (M3) • Alignment plate home position sensor (PI6)
  • The alignment plate does to leave the alignment home position sensor when the alignment motor is driven for 2 sec.
• Remedy:

• Code: E513-02
• Description: • Alignment motor (M3) • Alignment plate home position sensor (PI6)
  • The alignment plate does not return to the alignment home position when the alignment motor is driven for 2 sec.
• Remedy:

• Code: E531-01
• Description: • Stapler motor (M6) • Stapler motor home position detecting switch (MS7)
  • The stapler does not leave the stapler home position when the stapler motor is driven for 0.5 sec.
• Remedy:

• Code: E531-02
• Description: • Stapler motor (M6) • Stapler motor home position detecting switch (MS7)
  • The stapler does not leave the stapler home position when the stapler motor is driven for 0.5 sec.
• Remedy: