• Code: 141F
• Description: Pump Motor lock error
  The PF Motor was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • Pump Motor encoder failure • Pump Motor failure
• Remedy: Replace the Pump Motor encoder and Pump Motor .

• Code: 1431
• Description: Suction pump life error
  The Pump Cap Unit has reached the end of its service life. (The total number of revolutions of the Pump Motor has reached a predetermined limit)
• Remedy: Replace the Pump Cap Unit and reset the counter .

• Code: 1432
• Description: IC Holder life error
  The IC Holder has reached the end of its service life. (The total number of times that the holder was removed from the printer has reached a predetermined limit)
• Remedy: Replace the IC Holder and reset the counter .

• Code: 1434
• Description: Self-sealing valve life error
  The Self-sealing valve has reached the end of its service life.
• Remedy: Replace the Self-sealing valve and reset the counter .

• Code: 1435
• Description: Ink Path CR Assy life error
  The Ink Path CR Assy has reached the end of its service life.
• Remedy: Replace the Ink Path CR Assy and reset the counter .

• Code: 150C
• Description: PG position undetectable error
  When changing the PG, the PG sensor could not detect the PG position.
• Remedy: 1. Replace the PG Sensor. 2. Replace the APG Assy. 3. Remove any obstacles around the CR Unit home position. The printer changes the PG with the CR Unit being at its home position.

• Code: 1519
• Description: APG Motor oscillation error
  The control terminal (Vre terminal) of the APG Motor driver has shorted out.
• Remedy: 1. Remove the foreign material. 2. If the error still occurs, replace the Main Board.

• Code: 151A
• Description: APG Motor overload error
  • Connection failure of the APG Motor. • Overcurrent to the APG Motor was detected. • APG Motor cable is damaged. • Irregular load • APG encoder failure • APG Motor failure
• Remedy: Replace the APG Motor.