Code :

Code: 13.12.34
Display: 13.12.34 JAM IN LEFT ACCESSORY
Description: A jam (ejectors jam) exists in the paper-path area.
Remedy: 1 Clear the jam. 2 Turn the printer off, and then turn the printer on again. 3 Make sure that the stapled jobs meet the required specifications. 4 Make sure that the number of sheets per document are within specifications. 5 Make sure that the media in use meets specifications. 6 Make sure that the stapler is the home position. 7 Replace the whole unit.

Code: 13.12.41
Display: 13.12.41 JAM IN LEFT ACCESSORY
Description: A jam (initial jam) exists in the folding/booklet area.
Remedy: 1 Make sure that there is no media inside the output device at power on. 2 Make sure that the booklet meets specifications. 3 Clear the jam. 4 Turn the printer off, and then turn the printer on again. 5 Activate the staple-fold motor (M7) to make sure that the assembly works. 6 Perform the booklet adjustments as needed. 7 Check all cable connections at the module and at the controller PCA. 8 Replace the folding mechanism. 9 Replace the controller PCA.

Code: 13.12.51
Display: JAM IN LEFT ACCESSORY
Description: A jam (initial jam) exists in the booklet bin area.
Remedy: 1 Clear the jam. 2 Make sure that the booklet meets specifications. 3 Turn the printer off, and then turn the printer on again. 4 Activate the booklet bin sliding motor (M10) to make sure that the assembly works. 5 At power on, make sure that the booklet stopper moves completely in and out. 6 Check all cable connections at the module and at the controller PCA. 7 Replace the booklet bin. 8 Replace the controller PCA.

< 1 2 3 4 5 6 7 > Last ›