Code :

Code: 66.12.11
Display: 66.12.11 OUTPUT DEVICE FAILURE
Description: A stapler carriage motor failure (M8) occurred.
Remedy: 1 Make sure that the stapler cartridge is seated in the stapler unit correctly. 2 Activate the staple sliding motor (M8) by performing a mechanical test. 3 Make sure that the stapler unit slides to the home position. 4 Replace the stapler unit. 5 Replace the controller PCA. 6 Replace the whole unit.

Code: 66.12.31
Display: 66.12.31 OUTPUT DEVICE FAILURE
Description: A home position timeout (M1) occurred.
Remedy: 1 Check all of the cable connections at the controller PCA. 2 Turn the printer off, and then turn the printer on again to clear the error. 3 Activate the delivery motor (M1) by performing a mechanical test. 4 Replace the controller PCA. 5 Replace the whole unit.

Code: 66.12.34
Display: 66.12.34 OUTPUT DEVICE FAILURE
Description: A front aligning plate motor (M4) failure occurred.
Remedy: 1 Check all of the cable connections at the controller PCA. 2 Turn the printer off, and then turn the printer on again to clear the error. 3 Activate the front and back aligning plate motors (M4 and M5) by performing a mechanical test. 4 Adjust the front jogger by performing a calibration procedure. 5 Replace the controller PCA. 6 Replace the whole unit.

Code: 66.12.36
Display: 66.12.36 OUTPUT DEVICE FAILURE
Description: A stacker bin fluctuation motor (M6) failure occurred.
Remedy: 1 Check all of the cable connections at the controller PCA. 2 Turn the printer off, and then turn the printer on again to clear the error. 3 Activate the stacker bin fluctuation motor (M6) by performing a mechanical test. 4 Make sure that the stacker bin moves up and down at the poweron sequence. 5 Send two pages through as a test. 6 Replace the controller PCA. 7 Replace the whole unit.

Code: 66.12.41
Display: 66.12.41 OUTPUT DEVICE FAILURE
Description: A staple-fold motor (M7) failure occurred.
Remedy: 1 Check all of the cable connections at the controller PCA. 2 Turn the printer off, and then turn the printer on again to clear the error. 3 Activate the staple-fold motor (M7) by performing a mechanical test. 4 Perform a booklet adjustment as needed. 5 Replace the folding mechanism. 6 Replace the controller PCA.

‹ First < 6 7 8 9 10 >