Danh mục sản phẩm

Code :

Code: 29:02
Description: Maintenance Cartridge
Causes: Ink Absorber almost full
Remedy: Replace the Ink Absorber.

Code: 35:10
Description:
Causes: Rear Door sensor error detected
Remedy: • Check that the Left and Right Rear Door Sensor cables are not damaged and are connected correctly to the Interconnect PCA. • Replace the Rear Door

Code: 37:03
Description:
Causes: ARSS motor shutdown
Remedy: • Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • Replace the Rear Door

Code: 38.0:01
Description:
Causes: Paper jam detected in stacker; buffer sensor activated
Remedy: • Open stacker window and remove paper. • If problem persists, contact the stacker manufacturer.

Code: 38.0:10
Description:
Causes: Paper jam detected in stacker; buffer sensor not activated
Remedy: • Open stacker window and remove paper. • If problem persists, contact the stacker manufacturer.

Code: 38.1:01
Description:
Causes: Stacker communication error
Remedy: • Uninstall and reinstall stacker. • If problem persists, contact the stacker manufacturer.

Code: 38.1:03
Description:
Causes: Stacker multiple firmware upgrades
Remedy: • Uninstall and reinstall stacker. • If problem persists, contact the stacker manufacturer.

Code: 38.1:04
Description:
Causes: Stacker unable to upgrade firmware
Remedy: • Uninstall and reinstall stacker. • If problem persists, contact the stacker manufacturer.

‹ First < 5 6 7 8 9 10 11 > Last ›

0