Code :

Code: 39.2:01.2
Description:
Causes: Unable to load roll 3 from standby/parking position; roll mispositioned
Remedy: Roll 3 has been unloaded. Reload it and check that the paper is correctly aligned with the hubs.

Code: 39.2:01.3
Description:
Causes: Unable to load roll 2 from standby/parking position; paper edges were not found
Remedy: Roll 2 has been unloaded. Reload it.

Code: 39.2:01.3
Description:
Causes: Unable to load roll 3 from standby/parking position; paper edges were not found
Remedy: Roll 3 has been unloaded. Reload it.

Code: 40:03
Description:
Causes: Smart Roll-loading System Motor shutdown
Remedy: • Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • Open the Smart Roll-loading System and check for any visible obstacles restricting its movement. • Replace the Smart Roll-loading System Gear and Motor

Code: 41:03
Description: Media-Axis Motor
Causes: Paper motor electrical current limit
Remedy: • Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • Open the Window and check for any visible obstacles restricting the movement of the Drive Roller. If there is a wrinkled mass of paper inside the paper path, lift the Pinchwheels (using the Media Lever) and clear the obstruction. • Replace the Media-Axis Motor

Code: 42:03
Description: Scan-Axis Motor
Causes: Scan-Axis motor electrical current limit
Remedy: • Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • Open the Window and check for any visible obstacles restricting the movement of the Carriage Assembly. If there is a wrinkled mass of paper blocking the Carriage Assembly, then clear the obstruction. • Clean the Encoder Strip Clean the Encoder Strip. • Replace the Scan-Axis Motor

Code: 43.1:10
Description: Vacuum Fan
Causes: Vacuum Driver PCA communication or hardware failure
Remedy: • Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • If the system error persists, replace the Vacuum Fan

Code: 43:01
Description: Vacuum Fan
Causes: Vacuum Fan spinning at wrong speed
Remedy: • Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • If the system error persists, replace the Vacuum Fan