Code :

Code: 87:10
Description: Scan-axis encoder reading
Causes: Problem with the Carriage Encoder Sensor readings
Remedy: • Check that the Encoder Sensor is correctly connected to the Carriage PCA. • Check whether the Encoder Strip is broken or damaged. If necessary, replace it. • Check whether the Encoder Strip is dirty. If necessary, clean it. Pay special attention to the area near the Service Station. Follow the instructions on the front panel after selecting the Ink menu and then Clean Encoder Strip. • If the system error persists, clean the Encoder Sensor. • If the system error persists, replace the Encoder Sensor.

Code: 88:10
Description:
Causes: Smart Roll-loading System Position Sensor error detected
Remedy: • Check that the Left and Right Smart Roll-loading System Index Sensor and Actuator cables are not damaged and are connected correctly to the Interconnect PCA. • Replace the Indexer and Right Slider