Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP DesignJet T7200 — Trang 9/18

Code: 38.1:10

Description:
Causes: Stacker initialization error
Remedy: • Uninstall and reinstall stacker. • If problem persists, contact the stacker manufacturer.

Code: 38.2:03

Description:
Causes: Stacker unable to reach target temperature
Remedy: • Uninstall and reinstall stacker. • If problem persists, contact the stacker manufacturer.

Code: 38.2:10

Description:
Causes: Stacker temperature too high
Remedy: • Uninstall and reinstall stacker. • If problem persists, contact the stacker manufacturer.

Code: 38.2:11

Description:
Causes: Stacker temperature too low
Remedy: • Uninstall and reinstall stacker. • If problem persists, contact the stacker manufacturer.

Code: 38.3:11

Description:
Causes: Stacker heating element overhead switch off
Remedy: • Uninstall and reinstall stacker. • If problem persists, contact the stacker manufacturer.

Code: 38.4:10

Description:
Causes: Stacker heating element failure
Remedy: • Uninstall and reinstall stacker. • If problem persists, contact the stacker manufacturer.

Code: 38.5:01

Description:
Causes: Stacker motor overload
Remedy: • Uninstall and reinstall stacker. • If problem persists, contact the stacker manufacturer.

Code: 38.5:10

Description:
Causes: Stacker abnormal motor condition
Remedy: • Uninstall and reinstall stacker. • If problem persists, contact the stacker manufacturer.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie