Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP DesignJet T7200 — Trang 10/18

Code: 38.5:11

Description:
Causes: Stacker motor encoder failure
Remedy: • Uninstall and reinstall stacker. • If problem persists, contact the stacker manufacturer.

Code: 38.6:11

Description:
Causes: Stacker power supply failure
Remedy: • Uninstall and reinstall stacker. • If problem persists, contact the stacker manufacturer.

Code: 38.8:01

Description:
Causes: Paper jam detected in stacker; paper jam sensor activated
Remedy: • Open stacker window and remove paper. • If problem persists, contact the stacker manufacturer.

Code: 38.8:10

Description:
Causes: Paper jam detected in stacker; paper jam sensor not activated
Remedy: • Open stacker window and remove paper. • If problem persists, contact the stacker manufacturer.

Code: 38:03

Description:
Causes: Stacker communication protocol error
Remedy: • Uninstall and reinstall stacker. • If problem persists, contact the stacker manufacturer.

Code: 39.1:01.2

Description:
Causes: Unable to load roll 1 from standby/parking position; roll mispositioned
Remedy: Roll 1 has been unloaded. Reload it and check that the paper is correctly aligned with the hubs.

Code: 39.1:01.3

Description:
Causes: Unable to load roll 1 from standby/parking position; paper edges were not found
Remedy: Roll 1 has been unloaded. Reload it.

Code: 39.2:01.2

Description:
Causes: Unable to load roll 2 from standby/parking position; roll mispositioned
Remedy: Roll 2 has been unloaded. Reload it and check that the paper is correctly aligned with the hubs.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie