Code :

Code: 80.0X.YY
Display: 80.0X.YY Embedded Jetdirect Error
Description: An Embedded HP JetDirect print server critical error has occurred. • 80.01.80: No heartbeat • 80.01.81: Reclaim timeout • 80.01.82: Invalid data length • 80.01.8B: Invalid max outstanding packet header field • 80.01.8C: Invalid channel mapping response • 80.03.01: No PGP buffers • 80.03.02: Channel table full • 80.03.03: Producer index not reset • 80.03.04: Consumer index not reset • 80.03.05: Queue position size too small • 80.03.06: Transport overflow • 80.03.07: No overflow packets • 80.03.08: Invalid identify response • 80.03.09: Invalid channel map return status • 80.03.10: Invalid reclaim return status • 80.03.12: Datagram invalid buffer • 80.03.13: Max stream channels • 80.03.14: Max datagram channels • 80.03.15: Card reset failed • 80.03.16: Self-test failure • 80.03.17: Unknown PGP packet • 80.03.18: Duplicate I/O channel
Remedy: 1. Turn the product off, and then on. 2. Remove the RJ45 cable. 3. Turn the product off, and then on. 4. Reconnect the RJ45 cable. 5. If the error persists, replace the formatter.

Code: 82.73.46
Display: 82.73.46
Description: A hard disk or compact flash disk cleaning failed. This error is usually caused by a failure of the disk hardware.
Remedy: 1. Turn the product off, and then on. 2. Use the Clean Disk item in the Preboot menu. 3. Reload the firmware.

Code: 82.73.47
Display: 82.73.47
Description: A hard disk or compact flash disk cleaning failed. This error is usually caused by a failure of the disk hardware.
Remedy: 1. Turn the product off, and then on. 2. Use the Clean Disk item in the Preboot menu. 3. Reload the firmware.

Code: 98.00.01
Display: 98.00.01 Corrupt data in firmware volume
Description: Data corrupt has occurred in the firmware volume.
Remedy: 1. Turn the product off, and then on. 2. Use the Clean Disk item in the Preboot menu. 3. Reload the firmware. 98.00.02 Corrupt data in the solutions volume

Code: 98.00.02
Display: 98.00.02 Corrupt data in the solutions volume
Description: Data corrupt has occurred in the solutions volume.
Remedy: 1. Turn the product off, and then on. 2. Use the Clean Disk item in the Preboot menu. 3. Reload the firmware.

Code: 98.00.03
Display: 98.00.03 Corrupt data in the configuration volume
Description: Data corrupt has occurred in the configuration volume.
Remedy: 1. Turn the product off, and then on. 2. Download the firmware again, and then attempt the upgrade again. 3. Use the Clean Disk item in the Preboot menu. 4. Reload the firmware.

Code: 98.01.00
Display: 98.00.01 or 98.01.00 Corrupt data in firmware volume
Description: Data corrupt has occurred in the firmware volume.
Remedy: 1. Turn the product off, and then on. 2. Use the Clean Disk item in the Preboot menu. 3. Reload the firmware. 98.00.02 Corrupt data in the solutions volume