Code :

Code: SC46-16
Description: When reading images, in spite of no resource provided, an inappropriate processing such as an access to the compression device is made.
Causes: Overall control board (OACB) OACB program

Code: SC46-17
Description: When processing images, a filter coefficient cannot be created normally.
Causes: Overall control board (OACB) OACB program

Code: SC46-19
Description: When accessing to the memory device, a defective software is detected.
Causes: Overall control board (OACB) OACB program

Code: SC46-21
Description: The expansion processing from the memory to the page memory is not terminated within a specified period of time. The compression processing from the page memory to the memory is not terminated within a specified period of time. The development from the memory into the page memory is not terminated within a specified period of time. The transmission of the compressed data from memory to memory is not terminated within a specified period of time.
Causes: Printer control board (PRCB) Overall control board (OACB) OACB program

Code: SC46-23
Description: While in the image read, SVV does not turn OFF within a specified period of time and the preparation for scanning the next page cannot be started.
Causes: Overall control board (OACB)

Code: SC46-25
Description: AOC/AGC adjustment abnormality. • The light blocking cover at the read section and the lens cover are removed. • The connector of the CCD board is disconnected. • The power cable of the CCD board is unplugged. • The ICP of the CCD board is cut off. • The light volume of the exposure lamp is excessive. • The exposure lamp does not light up.
Causes: CCD board (CCDB) Exposure lamp (L1)