Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera KMC2030 — Trang 5/10

Code: C0660

Description: Scanner overrun failure
The Scanner Home Sensor detects the Scanner at its home position during a period from when the prescan command and scan preparation command have been executed to when home return command is executed.
Remedy: 1 Scanner can be moved manually. NO: Correct drive coupling (Scanner Belt tension, pulley operation, drive cable tension) 2 Scan motion: initial scan motion after the Power Switch has been turned ON or Front Door has been opened and closed. NO: Carry out misfeed/malfunction troubleshooting procedures. 3 Connectors are connected properly on Scanner Motor Drive Board: PWB-IC PJ1IC, PJ2IC, and PJ3IC. NO: Check connectors for connection. 4 Scanner Motor turns when the Start key is pressed. NO: Check connectors for connection. Change motor. Change Scanner Motor Drive Board. 5 I/O check for Scanner Home Sensor: the voltage across PJ6C-2 on Image Processing Board and GND is DC 0 V (home position) when the sensor is blocked and DC 5 V when the sensor is unblocked. YES: Change Image Processing Board. NO: Check sensor for installation. Correct detecting plate. Check sensor connector for connection. Change sensor. 6 “IR Area” check: Malfunction when Power Switch is turned ON after “Top Image” has been set to 0 and “FD-Mag.” to 1.000. NO: Adjust “IR Area” data.

Code: C0990

Description: LCC Lift-Up Motor malfunction
Remedy: 1 LCC Lift-Up Motor turns after the LCC Drawer has been slid into position while the LCC Drawer is being used. NO: Change motor. Change LCC Control Board.

Code: C0991

Description: LCC Lift 1 ascent motion failure
Remedy: 1 Lift 1 ascends after the LCC Lift-Up Motor has been energized. NO: Correct drive coupling (oneway gear engagement, coupling engagement, spring operation, and belt tension). 2 I/O check for Lift-Up Sensor 1 operation: the voltage across CN4A-6 on LCC Control Board and GND is DC 0 V when the sensor is unblocked and DC 5 V when the sensor is blocked (during lifting motion detection). YES: Change LCC Control Board. NO: Check sensor for installation. Check sensor connector for connection. Change sensor.

Code: C0995

Description: LCC Transport Motor malfunction
Remedy: 1 LCC Lift-Up Motor turns when the Start key is pressed while the LCC Drawer is being used. NO: Change motor. Change LCC Control Board.

Code: C0999

Description: LCC Lift 2 ascent motion failure
Remedy: 1 Lift 2 ascends after the LCC Lift-Up Motor has been energized. NO: Correct drive coupling (oneway gear engagement, coupling engagement, spring operation, and belt tension). 2 I/O check for Lift-Up Sensor 2 operation: the voltage across CN4A-9 on LCC Control Board and GND is DC 0 V when the sensor is unblocked and DC 5 V when the sensor is blocked (during lifting motion detection). YES: Change LCC Control Board. NO: Check sensor for installation. Check sensor connector for connection. Change sensor.

Code: C0B00

Description: Finishing option transport drive malfunction
Remedy:

Code: C0B20

Description: Stapling Unit CD drive malfunction
Remedy:

Code: C0B30

Description: Finishing option Paper Aligning Bar moving mechanism malfunction
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie