Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera KMC2030 — Trang 10/10

Code: C3A00

Description: PIC communication error
• A sampling lock is not received after the lapse of a predetermined period of time after IREQ has been received during AIDC sampling of image stabilization sequence or registration adjustment. • There is an open-circuit in the communication harness between the PIC Board and Master Board. • Either the PIC Board or Master Board is faulty.
Remedy: 1 Harnesses and connectors connecting PIC Board to Master Board are in good condition. NO: Change harnesses. Reconnect connectors. 2 The problem has been eliminated through the check of step 1. NO: Change PIC Board. 3 The problem is eliminated after the PIC Board has been replaced. NO: Change Master Board.oard.

Code: C3A01

Description: PIC Board malfunction
The PIC Board is faulty.
Remedy: 1 The same malfunction recurs even after the malfunction has been reset, Power Switch turned OFF and ON, and the power cord plugged out and back in. YES: Change PIC Board.

Code: C3FFF

Description: ROM contents fault detected upon start
The system fails to rewrite flash memory during updating.
Remedy: 1 This malfunction occurs when an attempt is made to update firmware (rewriting of flash ROM). YES: Try downloading again. 2 The problem has been eliminated through the check of step 1. NO: Change Master Board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie