• Code: 065
• Display: Service call
  065: Error
• Description: NIC Combination Error
• Remedy: Replace 86M board

• Code: 066
• Display: Service call
  066: Error
• Description: FAX Combination Error
• Remedy: Is FX-5 board used? No use FX-5 board.

• Code: 070
• Display: Service call
  070: Error
• Description: PostScript Internal Error
• Remedy: Is the error message displayed again? Yes Power supply Off/On Replace 86M board

• Code: 072
• Display: Service call
  072: Error
• Description: Engine I/F Error I/F Error between PU and CU
• Remedy: Replace 86M board

• Code: 073
• Display: Service call
  073: Error
• Description: Video Error When the image data sprads, defect is detected. (Incorrect data receive)
• Remedy: Does the error recur? Yes Change the PC to high spec or lower the resolution, and then print again. Replace 86M boar

• Code: 074, 075
• Display: Service call
  074: Error
  075: Error
• Description: Video Error When the image data spreads, defect is detected.
• Remedy: Replace 86M board

• Code: 081
• Display: Service call
  081: Error
• Description: Difference between version of CU firm and EEPROM
• Remedy: Does the error recur? Yes Do EEPROM Initialization. (Turn on the power supply by Cover-open & pressing START key & pressing CANCEL switch). Because the Mac address will disappear with this initialization, lease reset Mac address by using the maintenance utility. Replace 86M board

• Code: 104
• Display: Service call
  104: Error
• Description: EngineEEPROM mounting check is OK with turning on the power supply, after that, lead/light error is detected
• Remedy: Does the error recur? Yes Power supply Off/On Replace 86M board